Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-27T22:56:28.961Z Has data issue: false hasContentIssue false
  • English
  • Français

Role of Irradiation Embrittlement in RPV Lifetime Assessment

Published online by Cambridge University Press:  13 February 2015

Milan Brumovský
Milan Brumovský*
Affiliation:
Research Centre Řež, 250 68 Řež, Czech Republic.
*
*[email protected]
Get access

Abstract

Integrity and lifetime of reactor pressure vessels are practically determined by their material resistance against fast/non-ductile failure and consequently by their radiation damage resulting in irradiation embrittlement and hardening. Mechanism of irradiation embrittlement of RPV materials depends on selected materials and operation conditions but their values depend in a large extent on reactor design, i.e. on neutron flux/fluence depending on RPV wall. Generally, new RPV design allows smaller neutron fluences but absolute value of irradiation embrittlement still depends on a choice of RPV material. Even though radiation damage (especially irradiation embrittlement) is important for RPV behavior, integrity and lifetime depends, in principle, on final value of applied fracture mechanics parameter –transition temperature. Thus, its initial value as well as its shift due to irradiation embrittlement is of interest but only the embrittlement can be affected during operation.

Keywords

embrittlementneutron irradiationfatigue
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1769: Symposium 6E – Materials for Nuclear Applications , 2015 , IMRC 2014 6E-24
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

U.S. Code of Federal Regulation, Part 50.61 (10CFR 50.61), Fracture Toughness Requirements for Protection Against Pressurized Thermal Shock Events, Washington, DC (1905) NRC, Regulatory Guide 1.99, Revision 2, Radiation Embrittlement of Reactor Vessel Materials, Office of Nuclear Regulatory Research, Washington, DC (1998). ASTM Standard Guide E 900–02, Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials, E706 (IIF), Annual Book of ASTM Standards (2002).Google Scholar
Association Française pour les Regles de Conception et de Construction des Materiels de Chaudieres Electronucleaires, Règles de conception et de construction de matériels mécaniques de îlots nucléaires PWR, Paris (1995) Google Scholar
Kerntechnischer Ausschuss, Komponenten der Primärkreises von Leichtwasserreaktoren, KTA 3201, Cologne (1990) Google Scholar
Japanese Electric Association, JEAC-4201–2000, Method of Surveillance Tests for Structural Materials of Nuclear Reactors, JEA, Tokyo (2000) Google Scholar
Norms of strength calculations for equipment (components) and piping of nuclear power installations (plants), PNAE G-7-002-086, Moscow, Energoatomizdat, 1989 (In Russian). Google Scholar
International Atomic Energy Agency, Guidelines for Prediction of Irradiation Embrittlement of Operating WWER-440 Reactor Pressure Vessels, IAEA-TECDOC-1442, IAEA, Vienna (2005) Google Scholar
Methods for determination of fracture toughness for calculation of strength and lifetime of WWER-1000 RPVs on the base of surveillance specimen test results. RD EO 1.1.2.09.0789–2009. Appendix G. Procedure for determination of irradiation embrittlement of WWER-1000 RPV materials as a fiction of chemical composition of the steel, time of irradiation and fast neutron fluence (In Russian) Google Scholar
IAEA VERLIFE Guidelines for Evaluation of Integrity and Lifetime in WWER Components and Piping during Operation, IAEA, Vienna, 2013 Google Scholar