Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-24T19:54:34.074Z Has data issue: false hasContentIssue false
  • English
  • Français

Relatively Low Temperature Growth of Carbon Nanotubes by Thermal Chemical Vapor Deposition using Novel Catalysts

Published online by Cambridge University Press:  01 February 2011

Han-Chung Tai ,
Kao-Chao Lin ,
Tsung-Ying Chuang ,
Yao-Ren Chang ,
Rui-Ling Lai ,
Jiun-Kai Shiu  and
Huang-Chung Cheng
Han-Chung Tai
Affiliation:
[email protected], National Chiao Tung University, Department of Electronics Engineering, Dorm 7, Room 216 , 1001 Ta Hsueh Road, Hsinchu, Taiwan 300, ROC, Hsinchu, Taiwan, 300, Taiwan
Kao-Chao Lin
Affiliation:
[email protected], National Chiao Tung University, Department of Electronics Engineering, Hsinchu, 300, Taiwan
Tsung-Ying Chuang
Affiliation:
[email protected], National Chiao Tung University, Department of Electronics Engineering, Hsinchu, 300, Taiwan
Yao-Ren Chang
Affiliation:
[email protected], National Chiao Tung University, Department of Electronics Engineering, Hsinchu, 300, Taiwan
Rui-Ling Lai
Affiliation:
[email protected], National Chiao Tung University, Department of Electronics Engineering, Hsinchu, 300, Taiwan
Jiun-Kai Shiu
Affiliation:
[email protected], National Chiao Tung University, Department of Electronics Engineering, Hsinchu, 300, Taiwan
Huang-Chung Cheng
Affiliation:
[email protected], National Chiao Tung University, Department of Electronics Engineering, Hsinchu, 300, Taiwan
Get access

Abstract

We found out the promising catalyst materials(NiPd). The NiPd not only has the low melting point but also has the Pd enhancing the surface diffusion at low temperatures(<500'c ). With the Pd film thickness increasing, we could control the CNT density and synthesize more aligned and uniform CNTs. We also obtained the better electrical properties including lower turn-on field (3.4 V/um) and higher current density (34.3 mA/cm2) for NiPd as catalyst. For the advantages described above, we believe that the difficulty of low temperature on FED can be overcome. Further, the large area field emission display might be fabricated in the future.

Keywords

catalyticPdfield emission
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 922: Symposium U – Organic and Inorganic Nanotubes – From Molecular to Submicron Structures , 2006 , 0922-U07-16
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Iijima, S., Nature Vol. 354, p.56, 1991 Google Scholar
[2] Uh, H. S., Lee, S. M., Jeon, P. G., Thin Solid Films 462–463, 2004 (19–23)Google Scholar
[3] Lee, C. J., Son, K. H., Park, J., Chemical Physics Letters 338, (2001) 113–117 Google Scholar
[4] Li, Y. J., Sun, Z., Lau, S. P., Applied Physics Letters Vol. 79, No. 11, 10 September 2001 Google Scholar
[5] Tammann, G., Z. Phy. Chem. 1913, 85, 273 Google Scholar
[6] Kamada, K., Ikuno, T., Takahashi, S., Applied Surface Science 212–213 (2003) 383–387 Google Scholar
[7] Shyu, Y. -M., Hong, F. C. –N., Diamond Related Materials 10, (2001) 1241 Google Scholar
[8] Lee, Cheol Jin, Park, Jung Hoon, Park, Jeunghee, Chemical Physics Letters 323 (2000) 560–565 Google Scholar
[9] Hofmann, S., Ducati, C., Robertson, J., Applied Physics Letters, Vol.83, No.1, 2003 Google Scholar