Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-28T05:01:45.773Z Has data issue: false hasContentIssue false
  • English
  • Français

Regular, low density cellular structures - rapid prototyping, numerical simulation, mechanical testing

Published online by Cambridge University Press:  17 March 2011

J. Stampfl ,
M.M. Seyr ,
M.H. Luxner ,
H.E. Pettermann ,
A. Woesz  and
P. Fratzl
J. Stampfl
Affiliation:
TU Wien, Institute of Materials Science and Testing, Vienna, Austria
M.M. Seyr
Affiliation:
TU Wien, Institute of Lightweight Design and Structural Biomechanics, Vienna, Austria
M.H. Luxner
Affiliation:
TU Wien, Institute of Lightweight Design and Structural Biomechanics, Vienna, Austria
H.E. Pettermann
Affiliation:
TU Wien, Institute of Lightweight Design and Structural Biomechanics, Vienna, Austria
A. Woesz
Affiliation:
Max Planck Institute of Colloids and Interfaces, Dept. of Biomaterials, Potsdam, Germany
P. Fratzl
Affiliation:
Max Planck Institute of Colloids and Interfaces, Dept. of Biomaterials, Potsdam, Germany
Get access

Abstract

Cellular solids form the basis of many biological and engineering structures. Most models use the relative density and the mechanical properties of the bulk material as the main parameter for the prediction of the mechanical properties of such structures. In this work the influence of the architecture of periodic cellular solids on the mechanical properties is investigated numerically and experimentally.

Using computer aided design, structures with 8x8x8 base cells are designed and fabricated. The physical prototypes which are tested experimentally are made from thermosetting and thermoplastic polymers by employing Rapid Prototyping (RP) techniques. Various RP techniques are compared regarding their suitability for the fabrication of cellular materials.

For numerical simulation of the cellular structures, linear Finite Element analysis is employed. Three-dimensional models are set up using higher order beam elements. In a first step, the structure is treated as an infinite medium and homogenization via a 'periodic micro-field approach' is used. The entire elastic tensors for different relative densities are evaluated, from which the directional dependencies of the Young's moduli are derived. In a second step, simulations of finite structures are performed for direct comparison with experiments. Samples consisting of several basic cells are modeled which leads to a better correspondence to the experimental setup. Finite structures of different numbers of cells are modeled to study the influence of the sample size.

The experimental and numerical results correspond very well and form a consistent picture of the problem. The multi-disciplinary approach leads to a comprehensive view of effects which govern the mechanical behaviour of the investigated cellular structures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 823: Symposium W – Biological and Bioinspired Materials and Devices , 2004 , W8.8
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Hutmacher, D.W.. J. Biomaterials Science - polymer edition, 12 (2001), 107–124.CrossRefGoogle Scholar
[2] Bertsch, A., Zissi, S., Jezequel, J.Y., Corbel, S., and André, J.C.. Microsystem Technologies, 3(2), 1997, 42–47.CrossRefGoogle Scholar
[3] Nakamoto, T., Yamaguchi, K., Abraha, P.A., and Mishima, K.. J. Micromech. Microeng., 6 (1996), 240–253.CrossRefGoogle Scholar
[4] Woesz, A., Stampfl, J., and Fratzl, P.. Adv. Eng. Mat., 6 (2004), 134–138.CrossRefGoogle Scholar
[5] Gibson, L.J., Ashby, M.F.. Cellular Solids: Structure and properties, second ed. Cambridge University Press, 1997.CrossRefGoogle Scholar
[6] Kwon, Y.W., Cooke, R.E., and Park, C.. J. Mat. Sci. and Eng., A343, 2003, 63–70.CrossRefGoogle Scholar
[7] Zhu, H.X., Knott, J.F., and Mills, N.J.. J. Mech. Solids., 45 (1997), 319–343.CrossRefGoogle Scholar
[8] Christensen, R.M.. Int. J. Solids Struct., 37 (2000), 93–104.CrossRefGoogle Scholar
[9] Sanders, W.S., and Gibson, L.J.. J. Mat. Sci. and Eng., A352, 2003, 150–161.CrossRefGoogle Scholar