Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-24T11:54:07.377Z Has data issue: false hasContentIssue false
  • English
  • Français

Raman scattering based strategies for quality control and process monitoring in electrodeposited CuIn(S,Se)2 solar cell technologies

Published online by Cambridge University Press:  31 January 2011

Jacobo Álvarez-García ,
Xavier Fontané ,
Victor Izquierdo-Roca ,
Alejandro Perez-Rodriguez ,
Joan Ramón Morante ,
Edgardo Saucedo ,
Jesús Salvador Jaime-Ferrer  and
Verónica Bermúdez
Jacobo Álvarez-García
Affiliation:
[email protected], CRIC, Barcelona, Spain
Xavier Fontané
Affiliation:
[email protected], Universitat de Barcelona, Barcelona, Spain
Victor Izquierdo-Roca
Affiliation:
[email protected], Spain
Alejandro Perez-Rodriguez
Affiliation:
[email protected], Universitat de Barcelona, Barcelona, Spain
Joan Ramón Morante
Affiliation:
[email protected], Spain
Edgardo Saucedo
Affiliation:
[email protected], NEXCIS, Rousset, France
Jesús Salvador Jaime-Ferrer
Affiliation:
[email protected], NEXCIS, Rousset, France
Verónica Bermúdez
Affiliation:
[email protected], NEXCIS, Rousset, France
Get access

Abstract

This work reports the use of strategies based on Raman scattering for process monitoring of electrodeposited based S rich CuIn(S,Se)2 solar cells. Main vibrational modes in the Raman spectra are sensitive to features related to the crystalline quality, chemical composition and presence of secondary phases in the chalcopyrite layers, being all these features relevant for the optoelectronic properties of the final devices. Ex-situ and in-situ measurements during the electrochemical step allow the direct assessment on the formation of Se rich secondary phases which are related to the stoichiometry of the grown precursors. The analysis of the relative intensity of the spectral contribution from these phases allows early detection of deviations of precursor stoichiometry in relation to the optimum composition range in terms of solar cell efficiency. The applicability of the technique for the in-situ monitoring of the electrodeposition process is also discussed

Keywords

Raman spectroscopyII-VIelectrodeposition
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1165: Symposium M – Thin-Film Compound Semiconductor Photovoltaics–2009 , 2009 , 1165-M02-03
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lincot, D. et al. , Solar Energy 77, 725(2004)Google Scholar
2. Izquierdo-Roca, V. et al. , Thin Solid Films 517, 2163(2009)Google Scholar
3. Izquierdo, V. et al. , Thin Solid Films 516, 7021(2008)Google Scholar
4. Izquierdo-Roca, V. et al. , J. Appl. Phys. 101, 0103517(2007).Google Scholar
5. Palm, J. et al. , Proc. 20 20th th European Photovoltaic Solar Energy Conf. (Barcelona, Spain, June 2005) 1699 Google Scholar
6. Xu, C.M. Xu, X.L. Xu, J. Yang, X.J. Zuo, J. Kong, N. Huang, W.H. Liu, H.T. Semicond. Sci. Technol. 19, 1201(2004)Google Scholar
7. Poborchi, V.V. Kolobov, A.V. Tanaka, K. Appl. Phys. Lett. 72, 1167(1998)Google Scholar
8. Izquierdo-Roca, Víctor et al. , Physica Status Solidi A 1-4 (2009) DOI 10.1002/pssa.200881239Google Scholar