Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-30T23:43:36.192Z Has data issue: false hasContentIssue false

Plasma Deposited Porphyrin/Phthalocyanine Films as Promising Optical Gas Sensing Materials

Published online by Cambridge University Press:  01 February 2011

Gianluigi Maggioni
Affiliation:
[email protected], University of Padua, LNL-INFN, Viale dell'Università, 2, Legnaro (PD), I-35020, Italy
Michele Tonezzer
Affiliation:
[email protected], LNL-INFN, Legnaro (PD), I-35020, Italy
Sara Carturan
Affiliation:
[email protected], LNL-INFN, University of Padua c/o, Viale dell'Università, 2, Legnaro (PD), I-35020, Italy
Alberto Quaranta
Affiliation:
[email protected], University of Trento, DIMTI, Trento, I-38050, Italy
Katerina Severova
Affiliation:
[email protected], Brno University of Technology, Institute of Physical and Applied Chemistry, Brno, 61200, Czech Republic
Gianantonio Della Mea
Affiliation:
[email protected], University of Trento, DIMTI, Trento, I-38050, Italy
Get access

Abstract

5,10,15,20 meso-tetraphenyl porphyrin (H2TPP) and copper phthalocyanine (CuPc) films have been deposited by means of a recently developed plasma based technique named glow discharge induced sublimation (GDS). The two macrocycles have been deposited by vacuum evaporation (VE) and H2TPP by spin coating (SPIN) as well for comparison. The physical properties of the films have been characterized by means of scanning electron microscopy (SEM) and nitrogen physisorption measurements. SEM images and physisorption isotherms highlight both the much higher surface roughness and specific surface area of GDS samples with respect to the VE and SPIN ones. Optical sensing measurements, performed in differently concentrated ethyl alcohol atmospheres, highlight that GDS samples yield much higher response intensities than SPIN and VE films, short response times and complete recovery.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Natale, C. Di, Paolesse, R., Macagnano, A., Nardis, S., Martinelli, E., Dalcanale, E., Costa, M., D'Amico, A., J. Mater. Chem. 14, 1281 (2004).Google Scholar
2. Snow, A.W. and Barger, W.R. in Phthalocyanines: properties and applications, Vol. 1, Ed. Leznoff, C.C. and Lever, A.B.P. (VCH Publishers, Vol. 1, New York, 1989), p. 362 Google Scholar
3. Maggioni, G., Quaranta, A., Carturan, S., Patelli, A., Tonezzer, M., Ceccato, R. and Mea, G. Della, Chem. Mater. 17, 1895 (2005).Google Scholar
4. Tonezzer, M., Maggioni, G., Quaranta, A., Carturan, S. and Mea, G. Della, Sens. Actuators B 122, 613 (2007).Google Scholar
5. Tonezzer, M., PhD. Thesis, Trento University, 2007.Google Scholar
6. Richardson, T.H., Dooling, C.M., Worsfold, O., Jones, L.T., Kato, K., Shinbo, K., Kaneko, F., Treggoning, R., Vysotsky, M.O. and Hunter, C.A., Thin Solid Films 393, 259 (2001).Google Scholar