Hostname: page-component-745bb68f8f-d8cs5 Total loading time: 0 Render date: 2025-02-05T05:47:23.189Z Has data issue: false hasContentIssue false
  • English
  • Français

Piezoelectric Fiber Coatings and Micro-Tubes

Published online by Cambridge University Press:  16 February 2011

G.R. Fox ,
D. Damjanovic ,
P.A. Danai ,
N. Setter ,
H.G. Limberger  and
N.H. Ky
G.R. Fox
Affiliation:
Laboratoire de Céramique, EPFL, CH-1015 Lausanne, Switzerland
D. Damjanovic
Affiliation:
Laboratoire de Céramique, EPFL, CH-1015 Lausanne, Switzerland
P.A. Danai
Affiliation:
Laboratoire de Céramique, EPFL, CH-1015 Lausanne, Switzerland
N. Setter
Affiliation:
Laboratoire de Céramique, EPFL, CH-1015 Lausanne, Switzerland
H.G. Limberger
Affiliation:
Laboratoire d'Optique Appliquée, EPFL, CH-1015 Lausanne, Switzerland
N.H. Ky
Affiliation:
Laboratoire d'Optique Appliquée, EPFL, CH-1015 Lausanne, Switzerland
Get access

Abstract

Axially symmetric coatings of ZnO and PZT have been deposited onto fiber substrates by reactive dc magnetron sputtering. Multi-layer Cr/Au/ZnO/Cr/Au coating structures on optical fibers have been used to make integrated phase modulator devices. An analysis of the structural properties and piezoelectric response of the phase modulator devices will be presented. Microtubes of ZnO and Pt/ZnO/Pt multi-layers have been prepared by coating polyester fibers that act as a fugitive phase. After burning away the polyester fiber, up to 3 cm long micro-tubes with a 23 μm inside diameter and 3 to 9 μm wall thickness were obtained.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 360 , 1994 , 389
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

references

1.Jarzynski, J., J. Appl. Phys., 55, 3243 (1984).Google Scholar
2.Imai, M., Yano, T., Motoi, K., and Odajima, A., IEEE J. Quantum Electron., 28, 1901 (1992).Google Scholar
3.Czaplak, D.S., Weller, J.F., Goldberg, L., Hickernell, F.S., Knuth, H.D., and Young, S.R., Proc. IEEE Ultrasonics Symrp., 491 (1987).Google Scholar
4.Fox, G.R., Kosec, M., Danai, P.A., and Setter, N., in Electroceramics IV, vol. 1, edited by Waser, R., Hoffman, S., Bonnenberg, D., and Hoffman, Ch. (Proceedings of the 4th International Conference on Electroceramics and Applications, Aachen, Germany, 1994) pp. 253–258.Google Scholar
5.Hickernell, F. S., Proc. IEEE Ultrasonics Symp., 417 (1988).Google Scholar
6.Taylor, H.F., J. Lightwave Technol., 5, 990 (1987).Google Scholar
7.Fox, G.R. and Danai, P.A., J. Mater. Res., 9 (11), (1994).Google Scholar