No CrossRef data available.
Article contents
Modification of the Optical and Electrical Properties CdS Films by Annealing in Neutral and Reducing Atmospheres
Published online by Cambridge University Press: 12 September 2013
Abstract
Cadmium sulfide (CdS) films were deposited onto glass substrates by chemical bath deposition (CBD) from a bath containing cadmium acetate, ammonium acetate, thiourea, and ammonium hydroxide. The CdS thin films were annealed in argon (neutral atmosphere) or hydrogen (reducing atmosphere) for 1 h at various temperatures (300, 350, 400, 450 and 500 °C). The changes in optical and electrical properties of annealed treated CdS thin films were analyzed. The results showed that, the band-gap and resistivity depend on the post-deposition annealing atmosphere and temperatures. Thus, it was found that these properties of the films, were found to be affected by various processes with opposite effects, some beneficial and others unfavorable. The energy gap and resistivity for different annealing atmospheres was seen to oscillate by thermal annealing. Recrystallization, oxidation, surface passivation, sublimation and materials evaporation were found the main factors of the heat-treatment process responsible for this oscillating behavior. Annealing over 400 °C was seen to degrade the optical and electrical properties of the film.
Keywords
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2013