Hostname: page-component-745bb68f8f-5r2nc Total loading time: 0 Render date: 2025-01-27T15:33:17.721Z Has data issue: false hasContentIssue false
  • English
  • Français

Modification of Copper Surfaces: Effect on Adhesion at the Copper Polyimide Interface

Published online by Cambridge University Press:  21 February 2011

P. P. Parekh ,
K. T. Kembaiyan ,
K. E. Gonsalves ,
A. Bocarsly  and
L. Amos
P. P. Parekh
Affiliation:
Stevens Institute of Technology, Department of Chemistry and Chemical Engineering, Hoboken, New Jersey 07030
K. T. Kembaiyan
Affiliation:
Stevens Institute of Technology, Department of Chemistry and Chemical Engineering, Hoboken, New Jersey 07030
K. E. Gonsalves
Affiliation:
Stevens Institute of Technology, Department of Chemistry and Chemical Engineering, Hoboken, New Jersey 07030
A. Bocarsly
Affiliation:
Princeton University, Department of Chemistry, Princeton, New Jersey 08544
L. Amos
Affiliation:
Princeton University, Department of Chemistry, Princeton, New Jersey 08544
Get access

Abstract

Copper surfaces were derivatized resulting in the formation of Mx[Cu(II)(CN)Fe(II/III)(CN)5] at the interface. Polyimides were spin coated onto the modified metal surfaces and the degree of adhesion measured by the tape pull test. Effects of mechanical interlocking were evident in the case of modified copper samples, due to derivatization by ferricyanide. The chemical bonding and elemental analyses of the interfaces were studied by XPS and SEM.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 119: Symposium F – Adhesions in Solids , 1988 , 277
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Barraud, A., Rosilio, C., and Teixier, A.R., Thin Solid Films, 68, 91 (1980).Google Scholar
[2] Ringsdorf, H., Angew. Chem. Int. Ed., 15, 764 (1976).Google Scholar
[3] Barraud, A., Thin Solid Films, 70 317 (1982).Google Scholar
[4] Mann, B. and Kuhn, H., J. Appl. Phys., 42, 4398 (1971).Google Scholar
[5] Agarwal, V.K., Thin Solid Films, 50, 3 (1978).Google Scholar
[6] Pitt, c.w. and Walpita, L.M., Thin Solid Films, 68, 101 (1980).CrossRefGoogle Scholar
[7] Vincett, P.S. and Roberts, G.G., Thin Solid Films, 68, 135 (1980).Google Scholar
[8] Wilson, A.M., Thin Solid Films, 83, 145 (1981).Google Scholar
[9] Davies, G.C., Heath, B.A. and Gildenblat, G., Polyimides: Synthesis, Characterization and Applications Vol. 2 Mittal, K.L. Ed. Plenum, NY, 1984. p 847.Google Scholar
[10] Van Ooij, W.J., Organic Coatings: Science and Technology Vol. 6 Parfitt, G.D., Patisis, A.V. Eds. Marcel Dekker, NY 1984. p 277.Google Scholar
[11] Burkstrand, J.M.; J. Vac. Sci. Technol., 16(2), 363, Mar/Apr. 1979.Google Scholar