No CrossRef data available.
Article contents
Microstructure of epitaxial AlN layers on sapphire substrates deposited by physical vapor deposition
Published online by Cambridge University Press: 15 February 2013
Abstract
Asymmetric (10L) XRD peaks have been employed as a measure of epitaxial quality for aluminum nitride (AlN) nucleation layers (NL) deposited on sapphire substrate. Epitaxial AlN films have been deposited on 2-6” sapphire substrate by reactive sputtering. FWHM of AlN (103) and (105) were found to be an excellent indicator of quality of AlN films for GaN growth. AlN films produced nucleation layers with highly reproducible microstructure and GaN film growth. NLs had in-plane and out-of-plane texture as evident by the pole-figure results and selected area diffraction pattern. Based on electron microscopy results, AlN film thickness for complete atomic ordering was estimated to be 6-7 nm and most of the edge dislocations were seen in the first 20 nm of the film. Excellent thickness and texture uniformity were seen on planar and patterned sapphire substrates. A compressive stress of 2.9±0.2 GPa was seen in our BKM films. The maximum screw and edge dislocation densities of films were found to be ∼3 x 108 cm−2 and ∼9 x 109 cm−2 respectively. The root mean square roughnesses of A-polar films were found to be < 0.3 nm.
Keywords
- Type
- Articles
- Information
- Copyright
- Copyright © Materials Research Society 2013