Hostname: page-component-745bb68f8f-kw2vx Total loading time: 0 Render date: 2025-01-12T07:46:39.258Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructure and Properties of Eutectic Composites Based on (Ti, Nb)3 (Al, Si) and (Ti, Nb)5 (Si, Al)3

Published online by Cambridge University Press:  26 February 2011

R. Wagner ,
M. Es-Souni ,
D. Chen ,
B. Dogan ,
J. Seeger  and
P. A. Beaven
R. Wagner
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
M. Es-Souni
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
D. Chen
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
B. Dogan
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
J. Seeger
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany TU Hamburg-Harburg, 2100 Hamburg 90, Federal Republic of Germany
P. A. Beaven
Affiliation:
GKSS-Research Centre GmbH, Institute for Materials Research, 2054 Geesthacht, Federal Republic of Germany
Get access

Abstract

Previous work has shown that ternary Ti-Al-Si alloys with hypoeutectic and eutectic microstructures containing the intermetallic phases Ti3 (Al,Si) and Ti5 (Si,Al)3 have promising high temperature mechanical properties [1]. In the present investigation alloying additions of Niobium have been made to selected Ti-Al-Si alloys based on hypoeutectic compositions and the effects of Niobium on the microstructure and mechanical properties have been studied. The high temperature creep and oxidation behaviour of such alloys appears to be superior to that of currently available Ti3Al-based alloys.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 213: Symposium Q – High-Temperature Ordered Intermetallic Alloys IV , 1990 , 1007
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wu, J.S., Beaven, P.A., Wagner, R., Hartig, Ch. and Seeger, J., in “High-Temperature Ordered Intermetallic Alloys III” edited by Liu, C. T., Taub, A. I., Stoloff, N.S. and Koch, C.C., MRS, 1989, p. 761.Google Scholar
2. Kim, Y.W. and Froes, F.H., in “High Temperature Aluminides and Intermetallics”, edited by Whang, S.H., Liu, C.T. and Pope, D., TMS, Warrendale, PA, 1990, in the press.Google Scholar
3. Cho, W., Thompson, A.W. and Williams, J.C., Metall. Trans. 21A, 641 (1990).Google Scholar
4. Strychor, R., Williams, J.C. and Soffa, W.A., Metall. Trans. 19A, 225 (1988).Google Scholar
5. Banerjee, D., Gogia, A.K., Nandi, T.K. and Joshi, V.A., Acta. Metall. 36, 871 (1988).Google Scholar
6. Wu, J.S., Beaven, P.A. and Wagner, R., Scripta Metall. Mater. 24, 207 (1990)Google Scholar
7. Bendershy, L.A., Boettinger, W.J., Burton, B.P. and Biancaniello, F.S., Acta Metall. 38, 931 (1990).Google Scholar