Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-12-01T01:17:54.340Z Has data issue: false hasContentIssue false
  • English
  • Français

Microstructural evolution of La-doped SiB6 high-temperature thermoelectric material during a Spark Plasma Sintering

Published online by Cambridge University Press:  21 March 2011

D.W. Lee ,
J.H. Won ,
K.H. Kim ,
J. Matsushita  and
K.B. Shim
D.W. Lee
Affiliation:
CPRC, Hanyang Univ., Seoul 133-791, Korea
J.H. Won
Affiliation:
CPRC, Hanyang Univ., Seoul 133-791, Korea
K.H. Kim
Affiliation:
Dept. of Mat. Sci., Tokai Univ., Hirasuka 259-1292, JapanTEL:+82-2-2290-0501, FAX:+82-2-2291-7395, e-mail: [email protected]
J. Matsushita
Affiliation:
Dept. of Mat. Sci., Tokai Univ., Hirasuka 259-1292, JapanTEL:+82-2-2290-0501, FAX:+82-2-2291-7395
K.B. Shim
Affiliation:
CPRC, Hanyang Univ., Seoul 133-791, Korea
Get access

Abstract

SiB6 has proved to a potentially useful material because of its excellent thermoelectrical properties above 700°C, low specific gravity, high degree of hardness, and moderate melting point. SiB6, which has poor sinterability with a conventional sintering technique due to the covalent characteristic, has been successfully densified fully using a spark plasma sintering(SPS) method. The SPS-processed specimens consisted of SiB6, SiB4 and SixBy phases. Pure SiB6 powder were densified fully at the sintering temperature of 1600°C. In particular, it was found that the rare earth element was very effective in evolving the microstructure of SiB6 phase, resulting in reducing the sintering temperature and controlling grain growth. These effects were discussed in details in terms of microstructure evolution during the SPS process.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 691: Symposium G – Thermoelectric Materials 2001--Research and Applications , 2001 , G8.13
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Wood, C., Emin, D., Feigelson, R.S. and Mackinon, I.D.R., in Symposium Proceeding, Vol.97, “Novel Refactory Semiconductors”, California, April 1987, edited by Emin, D., Aselage, T.L. and Wood, C. (Materials Research Society, Pittsburgh, PA, 1987) P.33 Google Scholar
2. Wood, C., Emin, D., Frigelson, R.S. and Macknnon, I.D.R.: “Novel Refactory Semiconductors”, California, April 1987, edited by Emin, D., Aselage, T.L. and Wood, C. (Materials Research Society, Pittsburgh, PA, 1987), p.33.Google Scholar
3. Chen, L., Goto, T. and Hirai, T., Materials Transaction, JIM, 37, 5, 1182(1996)Google Scholar
4. Tokita, M., Trends in advanced SPS spark plasma systems and technology, J.Soc.Powder.Technol. Japan. 30, 790–804, (1993)Google Scholar
5. Gao, L., and Miyamoto, H., Spark plasma sintering technology, J. Inorg. Mater. 12, 129–133. (1997)Google Scholar
6. Tamari, N., Tanaka, T., Tanaka, K., Kondoh, I., Kawahara, M., and Tokita, M., Effect of spark plasma sintering on densification and mechanical properties of silicon carbide, J.Ceram.Soc.Jpn. 103, 740–742. (1995)Google Scholar