Hostname: page-component-745bb68f8f-s22k5 Total loading time: 0 Render date: 2025-01-27T02:27:43.802Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Fe3Al Intermetallic Matrix Composites

Published online by Cambridge University Press:  21 March 2011

B.G. Park ,
S.H. Ko  and
Y.H. Park
B.G. Park
Affiliation:
Tohoku National Industrial Research Institute, 4–2–1 Nigatake, Miyagino-ku, Sendai, 983–8511, Japan
S.H. Ko
Affiliation:
Tohoku National Industrial Research Institute, 4–2–1 Nigatake, Miyagino-ku, Sendai, 983–8511, Japan
Y.H. Park
Affiliation:
Tohoku National Industrial Research Institute, 4–2–1 Nigatake, Miyagino-ku, Sendai, 983–8511, Japan
Get access

Abstract

Iron aluminides are of considerable interest due to their low cost, relatively high melting point, relatively low density, and excellent resistance to oxidation, sulfidation and molten salts. However, poor ductility and fracture toughness at room temperature hinder their use as a structural material. Refining of the microstructure is known to be one method to increase the room temperature ductility. Mechanical alloying (MA) is an easy way to obtain fine microstructures. In addition, pulse discharge sintering (PDS) is a new technology which suppresses grain growth during sintering because the sparks generated during sintering break the surface oxide layer of the powder particles and thus speed up the sintering process. Therefore, the combination of MA and PDS processes results in final products with very fine microstructures. Fe-28at.%Al alloy and its composite reinforced with 5vol.% of TiB2 particles were fabricated by the MA-PDS process. The mechanical properties of these materials were improved significantly as compared to conventionally processed materials.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 646 , 2000 , N5.19.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. McKamey, C.G. and Maziasz, P.J., Intermetallics 6, 303–314 (1998).Google Scholar
2. Gaydosh, D.J., Draper, S.L., Noebe, R.D. and Nathal, M.V., Mat. Sci.&Eng. A150, 7–20 (1992).Google Scholar
3. Strothers, S. and Vedula, K., Proc. Powder Metallurgy Conf., vol. 43, 597–610, Metal Powder Industry Fedration, Princeton, NJ (1987).Google Scholar
4. Baccino, R. and Moret, F., 29th Int. Symp. On Automotive Technology & Automation, edited by Roller, D., 501–506, Automotive Automation Limited, Florence, Italy (1996).Google Scholar
5. Baligidad, R.G., Prakash, U., Radhakrishna, A. and Ramakrishna Rao, V., Scripta 36, 667–671 (1997).Google Scholar
6. Benjamin, J.S., Metall. Trans. 1, 2943–2951 (1970).Google Scholar
7. Oleszak, D. and Shingu, P.H., Mat. Sci. & Eng. A181/A182, 1217–1221 (1994).Google Scholar
8. Valdre, G., Botton, G.A. and Brown, L.M., Acta Mater. 47, 2303–2311 (1999).Google Scholar
9. Sun, Z.M., Hashimoto, H., Park, Y.H. and Abe, T., Mater. Trans. JIM 40, 879–882 (1999).Google Scholar
10. Abe, T.: Doctorate Dissertation, Tohoku University, Sendai, Japan (1987).Google Scholar
11. Schneibel, J.H., ‘Processing, Properties, and Applications of Iron Aluminides’, edited by Schneibel, J.H. and Crimp, M.A., 329–342, TMS society (1994).Google Scholar
12. Mendiratta, M.G., Ehlers, S.K., Chatterjee, D.K. and Lipsitt, H.A., Metall. Trans. 18A, 283–291 (1987)Google Scholar