Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-07T23:13:21.324Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Carbon Films for Thin Film Disks

Published online by Cambridge University Press:  16 February 2011

Richard L. White ,
Mary F. Doerner  and
George W. Walker
Richard L. White
Affiliation:
IBM Corp., General Products Division, San Jose, CA 95193
Mary F. Doerner
Affiliation:
IBM Corp., General Products Division, San Jose, CA 95193
George W. Walker
Affiliation:
IBM Corp., General Products Division, San Jose, CA 95193
Get access

Abstract

Carbon overcoat films are used extensively in thin film disk applications to provide wear resistance. A nano-indentation technique and wafer curvature measurements have been used to study the mechanical properties of carbon films sputtered under various processing conditions. Specifically, the effects of substrate/target spacing, power, pressure, and substrate bias have been studied for films sputtered in an argon plasma. The relationship of these properties to contact start-stop performance of hydrocarbon lubricated disks is further described. The frictional performance during the test can be related to film hardness, while the durability can be affected by the residual film stress.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 188: Symposium K – Thin Films: Stresses and Mechanical Properties II , 1990 , 213
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Doan, T. and Mackintosh, N.D., TrIbology and Mechanics of Magnetic Storage Systems, Vol. V, STLE SP-25, 6 (1988).Google Scholar
2. Tsai, H., et. al., J. Vac. Sci. Technol., 3 (A7), 2491 (1989)Google Scholar
3. Marchon, B., Heiman, N., and Khan, M.R., IEEE Trans. Mag 26, 168 (1990)Google Scholar
4. Miyamoto, T., Sato, I., and Ando, Y., Tribology and Mechanics of Magnetic Storage Systems, Vol. V, STLE SP-25, 55 (1988).Google Scholar
5. Rabinowicz, E., Friction and Wear of Materials, J. Wiley and Sons, 1965.Google Scholar
6. Doerner, M.F. and Nix, W.D., J. Mater. Res. 1 (4), 601 (1986).Google Scholar
7. Timsit, R. S. and Stratford, G., Tribology and Mechanics of Magnetic Storage Systems, Vol V., STLE SP-25, 17 (1988).Google Scholar
8. Ronay, M., Phils. Mag, 42, 161 (1979).Google Scholar
9. Suzuki, S. and Kennedy, F.E. Jr., IEEE Trans Mag, 25 (5), 3728 (1989).Google Scholar
10. Hamilton, G.M. and Goodman, L.E., ASME J. App. Mech., 33, 372 (1966).Google Scholar