Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-04T17:56:19.598Z Has data issue: false hasContentIssue false
  • English
  • Français

MBE Regrowth of AlGaAs on Ion Etched GaAs/AlGaAs Microstructures

Published online by Cambridge University Press:  21 February 2011

J. P. Harbison ,
A. Scherer ,
D. M. Hwang ,
L. Nazar  and
E. D. Beebe
J. P. Harbison
Affiliation:
Bellcore, Red Bank, New Jersey 07701-7020
A. Scherer
Affiliation:
Bellcore, Red Bank, New Jersey 07701-7020
D. M. Hwang
Affiliation:
Bellcore, Red Bank, New Jersey 07701-7020
L. Nazar
Affiliation:
Bellcore, Red Bank, New Jersey 07701-7020
E. D. Beebe
Affiliation:
Bellcore, Red Bank, New Jersey 07701-7020
Get access

Abstract

The combination of an ion beam assisted etching (IBAE) system and a Molecular Beam Epitaxy (MBE) growth chamber integrally connected in the same set of ultrahigh vacuum (UHV) chambers has allowed us to etch patterns defined by a strontium fluoride mask down into the underlying semiconductor wafer, and regrow monocrystalline material around these patterned structures entirely in situ. Scanning electron microscopy (SEM) analysis of the regrown structures reveals very directional deposition of the overgrown material. Cross-sectional transmission electron microscopy (TEM) reveals a smooth interface and vertical sidewalls at the boundary between the etched surfaces and the overgrowth. Material deposited on the sidewalls is shown to be monocrystalline, while that deposited over the mask is polycrystalline. The SrF2 mask material, previously shown to be an excellent IBAE mask for extremely fine nanostructures, is also shown to be compatible with the high temperatures need for overgrowth, and regrowth around structures as small as ˜200 nm in size has been demonstrated.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 126: Symposium P – Advanced Surface Processes for Optoelectronics , 1988 , 11
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cho, A.Y. and Arthur, J.R., Progress in Solid State Chemistry, Vol.10, part 3, 157 (1975).CrossRefGoogle Scholar
2. Casey, H.C. Jr., Panish, M.B., Heterostructure Lasers, part B, Academic Press Inc., 118 (1978).Google Scholar
3. Lincoln, G.A., Geis, M.W., Pang, S.W., Efremow, N.N., J. Vac. Sci. Technol., B1,1043 (1983).CrossRefGoogle Scholar
4. Scherer, A., Craighead, H.G., Beebe, E.D., J. Vac. Sci. Technol., A5,1604 (1984).CrossRefGoogle Scholar
5. Sullivan, P.W., Appl. Phys. Lett., 44,190 (1984)CrossRefGoogle Scholar
6. Scherer, A., Harbison, J.P., Hwang, D.M. and Beebe, E.D., Proceedings of the SPIE Advances in Semiconductors and Superconductors: Physics and Device Applications, held at Newport Beach, California, March 13–18,1988.Google Scholar