Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-28T11:32:44.094Z Has data issue: false hasContentIssue false
  • English
  • Français

The Materials Science of “Permeable Polysilicon” Thin Films

Published online by Cambridge University Press:  15 March 2011

George M Dougherty ,
Timothy Sands  and
Albert P. Pisano
George M Dougherty
Affiliation:
Department of Materials Science and Engineering andDepartment of Mechanical Engineering University of California – Berkeley Berkeley, CA 94720
Timothy Sands
Affiliation:
Department of Materials Science and Engineering andDepartment of Mechanical Engineering University of California – Berkeley Berkeley, CA 94720
Albert P. Pisano
Affiliation:
Department of Mechanical Engineering University of California – Berkeley Berkeley, CA 94720
Get access

Abstract

Polycrystalline silicon thin films that are permeable to fluids, known as permeable polysilicon, have been reported by several researchers. Such films have great potential for the fabrication of difficult to make MEMS structures, but their use has been hampered by poor process repeatability and a lack of physical understanding of the origin of film permeability and how to control it. We have completed a methodical study of the relationship between process, microstructure, and properties for permeable polysilicon thin films. As a result, we have determined that the film permeability is caused by the presence of nanoscale pores, ranging from 10-50 nm in size, that form spontaneously during LPCVD deposition within a narrow process window. The unusual microstructure within this process window corresponds to the transition between a semicrystalline growth regime, exhibiting tensile residual stress, and a columnar growth regime exhibiting compressive residual stress. A simple kinetic model is proposed to explain the unusual morphology within this transition regime. It is determined that measurements of the film residual stress can be used to tune the deposition parameters to repeatably produce permeable films for applications. The result is a convenient, single-step process that enables the elegant fabrication of many previously challenging structures.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 687: Symposium B – Materials Science of Microelectromechanical Systems (MEMS) Devices IV , 2001 , B7.3
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Judy, M.W. and Howe, R.T., IEEE Micro Electro Mechanical Systems Workshop (1993), pp.265–271.Google Scholar
2. Lebouitz, K.S., Howe, R.T., and Pisano, A.P., 8th International Conference on Solid-State Sensors and Actuators (Transducers '95), IEEE, 1995, vol. 1, pp.224–7.Google Scholar
3. Lebouitz, K.S., Mazaheri, A., Howe, R.T., and Pisano, A.P., 12th International IEEE Conference on Micro Electro Mechanical Systems (MEMS '99), 1999, pp.470–5.Google Scholar
4. Monk, D.J., Krulevitch, P., Howe, R.T., and Johnson, G.C., in Thin Films: Stresses and Mechanical Properties, edited by Townsend, P.H. et al. (Mater. Res. Soc. Proc. 308, 1993) pp. 641–646.Google Scholar
5. Hegde, R.I., Chonko, M.A. and Tobin, P.J., in Amorphous Silicon Technology, edited by Schiff, E.A. et al. (Mater. Res. Soc. Proc. 297, 1993) pp. 1037–1042.Google Scholar
6. Lee, E.G. and Rha, S.K., J. of Materials Sci. 28, 6279–6284 (1993).Google Scholar
7. Krulevitch, P., Nguyen, T.D., Johnson, G.C., Howe, R.T., Wenk, H.R., Gronksy, R., in Evolution of Thin Film and Surface Microstructure (Mater. Res. Soc. Proc. 202, 1991) pp. 167–172.Google Scholar
8. Krulevitch, P., Howe, R.T., Johnson, G.C., and Huang, J., International Conference on Solid- State Sensors and Actuators (Transducers '91), IEEE, 1991, pp. 949–952.Google Scholar
9. Chonko, M., Vandenberg, D., and Keitz, D., in The Physics and Chemistry of SiO2 and the Si- SiO2 Interface 2, edited by Helms, C.R. and Deal, B.E., (Plenum, New York, 1993) pp. 357–362.Google Scholar
10. Olson, G.L. and Roth, J.A., Mat. Sci. Reports 3 (1), 1–78 (1988).Google Scholar