Article contents
Magnetic Properties of Hitperm (Fe,Co)88Zr7B4Cu1 Nanocrystalline Magnets (Invited)
Published online by Cambridge University Press: 21 February 2011
Abstract
Alloys consisting of Fe-Co-M-B-Cu (with M = Zr, Hf, Nb), called HITPERM alloys, have been developed. Synchrotron X-radiation studies have been used to show that the ferromagnetic phase in an equiatomic FeCo-based alloy is the α'-FeCo phase. Since both the α'-FeCo phase and the FeCo-based amorphous phase of the nanocrystalline alloy have high Curie temperatures, a high magnetization persists up to the α -> γ structural phase transformation temperature of 980°C. Room temperature AC permeability measurements have shown that the alloys maintain a high permeability of ∼2000 up to a frequency of 20 kHz. The room temperature core loss has also been shown to be competitive with commercial high temperature magnetic alloys with a value of 1 W/g at Bs = 10 kG andf= 10 kHz. Analysis of extended X-ray absorption fine structure (EXAFS) data is consistent with a two-phase mixture of nanocrystalline body centered cubic derivative FeCo structure and an amorphous Zr-rich phase. A differential scanning calorimetry study of the primary crystallization reaction shows an activation energy of 323.3 kJ/mol. As a preliminary study of phase and grain stability, broadening of X-ray diffraction peaks indicates little grain growth after annealing at 600 °C for 3072 hours.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1999
References
REFERENCES
- 8
- Cited by