Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-28T05:34:49.800Z Has data issue: false hasContentIssue false
  • English
  • Français

Macroscopic Probing of the Joint Between Metals in Mr Heads

Published online by Cambridge University Press:  10 February 2011

Jibin Geng ,
X. Yan ,
X.X. Zhang ,
Xiaofeng Zhang ,
N. Wang  and
K.K. Fung
Jibin Geng
Affiliation:
Physics Department, Hong Kong University of Science And Technology, Clear Water Bay, Kowloon, Hong Kong
X. Yan
Affiliation:
Physics Department, Hong Kong University of Science And Technology, Clear Water Bay, Kowloon, Hong Kong
X.X. Zhang
Affiliation:
Physics Department, Hong Kong University of Science And Technology, Clear Water Bay, Kowloon, Hong Kong
Xiaofeng Zhang
Affiliation:
Physics Department, Hong Kong University of Science And Technology, Clear Water Bay, Kowloon, Hong Kong
N. Wang
Affiliation:
Physics Department, Hong Kong University of Science And Technology, Clear Water Bay, Kowloon, Hong Kong
K.K. Fung
Affiliation:
Physics Department, Hong Kong University of Science And Technology, Clear Water Bay, Kowloon, Hong Kong
Get access

Abstract

During the wafer manufacturing process of magnetoresistive (MR) heads which are widely used in Hard Disk Drives, the metal leads are deposited on both sides of the MR sensing element through the photoresist masks. Due to the shadowing effect of the photoresist, there may be some contamination at joint interfacial region even after ion etching. This introduces additional contact resistance and causes some region of the sensing element to be unpinned. As the geometry of the sensor element decreases, and the contamination, located in regions of few thousands of angstroms, is becoming more severe for MR head than ever. In this paper, we developed a systematic method to evaluate the contact resistance between the two metal layers. A comparison was made between the magnetic read width and the physical width. Finally TEM analysis successfully revealed the interfacial junction contamination.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 517: Symposium F – Wide Bandgap Semiconductors for High Power, High Frequency , January 1998 , 343
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ishiwata, Nouyuki, Ishi, Tsutomu, Matsutera, Hisao, and Yamada, Kazuhiko, IEEE Trans. Magn., Vol.32, p.38. (1996).10.1109/20.477547Google Scholar
2. Mallinson, John C., Magneto-Resistive Heads (Academic Press, 1996) p.52–53.Google Scholar
3. Tsang, C., IEEE Trans. Magn., Vol. 25, p. 3692. (1989).10.1109/20.42403Google Scholar
4. WITE and GPTE User's Menu, Guzik Technical, Inc., 1995.Google Scholar
5. Internal program “MR TEST” for MR head characterization in GUZIK WITE environment.Google Scholar
6. Baubock, Gunther, Dang, Huan Q., Hinson, David C., Rea, Luarence L., and Kim, Young K, IEEE Trans. Magn, Vol.32., P.25 (1996).10.1109/20.477545Google Scholar
7. Zolla, Howard G., INTERMAG'97 Article FP-13 (1997).Google Scholar
8. Gangulee, A. and d'Heurle, F.M., Japan J. Appl. Phys. Suppl. Vol.2. p. 625 (1974).10.7567/JJAPS.2S1.625Google Scholar
9. Private discussions with Dr. Kang Wang, Po.Google Scholar