No CrossRef data available.
Published online by Cambridge University Press: 10 February 2011
AlxTi1-xN film growth has been studied by a organometallic chemical vapor deposition and in-situ X-ray photoelectron spectroscopy. Terakis(dimethylamido)titanium (TDMAT) and dimethyl aluminum hydride (DMAH) were used as the Ti, N and Al precursors. AlTiN film growth was observed on SiO2/Si(100) with substrate temperatures between 200 and 400 °C. The Al content in the film is controlled by the ratio of partial pressures of the two precursors in the gas phase. The metal to C to N ratio is approximately constant at 1:1:1 for most conditions studied. The chemical states of Ti, C, and N in AlxTi1-xN and titanium-carbo-nitride (TiCN) films are identical, while the Al chemical state is nitride at low, but increasingly carbidic at high Al concentration. The initial growth rate on SiO2 was significantly suppressed by the presence of DMAH. At lower growth temperatures, the DMAH effect is more severe. Good step coverage was observed for AlxTi1-xN on 0.3 μm vias with a 3:1 aspect ratio.