Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-28T22:36:11.919Z Has data issue: false hasContentIssue false
  • English
  • Français

LiMBO3 (M=Fe, Mn): Potential Cathode for Lithium Ion Batteries

Published online by Cambridge University Press:  01 February 2011

Jan L. Allen ,
Kang Xu ,
Sam S. Zhang  and
T. Richard Jow
Jan L. Allen
Affiliation:
Sensors and Electron Devices Directorate, U.S. Army Research Laboratory Adelphi, MD 20783-1197, U.S.A.
Kang Xu
Affiliation:
Sensors and Electron Devices Directorate, U.S. Army Research Laboratory Adelphi, MD 20783-1197, U.S.A.
Sam S. Zhang
Affiliation:
Sensors and Electron Devices Directorate, U.S. Army Research Laboratory Adelphi, MD 20783-1197, U.S.A.
T. Richard Jow
Affiliation:
Sensors and Electron Devices Directorate, U.S. Army Research Laboratory Adelphi, MD 20783-1197, U.S.A.
Get access

Abstract

Recently discovered borates, LiMBO3 (M=Fe, Mn), share similarities with LiFe(Mn)PO4. They are polyanion structures, contain extractable lithium and suffer from low electronic conductivity. They are attractive to replace expensive, less abundant redox metals in current use in cathodes with environmentally friendly iron or manganese. Phosphate or borate groups adjacent to the redox active metal increase the voltage of the redox couple through an inductive effect. The LiFeBO3 discharge curve shows a pseudo-plateau around 2.6 V for the Fe(II) / Fe(III) couple. This study brings to bear techniques to improve electrode conductivity to produce LiMBO3 composite electrodes thus allowing access to some of the high, theoretical specific capacity. At low current, up to 70 percent of lithium could be extracted from LiFeBO3 that was prepared in the presence of high surface area, highly electrically conductive carbon black. Attempts to improve the cathode properties of LiMnBO3 were less successful.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 730: Symposium V – Materials for Energy Storage, Generation, and Transport , 2002 , V1.8
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Manitheram, A. and Goodenough, J.B., J. Solid State Chem. 71, 349 (1991).Google Scholar
2. Leganeur, V., An, Y., Mosbh, A., Portal, R., Salle, A. Le Gal La, Verbaere, A., Guyomard, D. and Piffard, Y., Solid State Ionics, 139, 37 (2001).Google Scholar
3. Rowsell, J.L.C., Gaubicher, J. and Nazar, L.F., J. Power Sources 97-98, 254 (2001).Google Scholar
4. Yamada, A, Chung, S.C. and Hinokuma, K., J. Electrochem. Soc. 148(3) A224 (2001).Google Scholar
5. Huang, H., Yin, S.-C. and Nazar, L.F., Electrochem. Solid-State Letters, 4(10) A170 (2001).Google Scholar
6. Armand, Michel, Besner, Simon, Ravet, Nathalie, Martin Simoneau, Alain Vallee and Jean-Francois Magnan, European Patent No. EP 1 049 182 (2 November 2000).Google Scholar