Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-24T14:40:52.977Z Has data issue: false hasContentIssue false
  • English
  • Français

Lattice Parameter Change of BaSrTiO3 Films Grown by Pulsed Laser Deposition

Published online by Cambridge University Press:  10 February 2011

W.J. Kim ,
W. Chang ,
S.B. Qadri ,
J.S. Horwitz  and
D.B. Chrisey
W.J. Kim
Affiliation:
SFA Inc., 1401 McCormick Dr., Largo, MD 20774, [email protected]
W. Chang
Affiliation:
Naval Research Laboratory, 4555 Overlook Ave., Washington DC 20375
S.B. Qadri
Affiliation:
Naval Research Laboratory, 4555 Overlook Ave., Washington DC 20375
J.S. Horwitz
Affiliation:
Naval Research Laboratory, 4555 Overlook Ave., Washington DC 20375
D.B. Chrisey
Affiliation:
Naval Research Laboratory, 4555 Overlook Ave., Washington DC 20375
Get access

Abstract

Single phase Bao0.5Sro0.5TiO3 films with three different thicknesses (40, 80, and 160 nm) have been deposited onto MgO substrates by pulsed laser deposition (PLD). The lattice parameters for the thin film have been measured using x-ray diffraction. The deposited films all show a significant tetragonal distortion. The in-plane lattice parameters for all film thickness are always larger than surface normal lattice parameters for as-deposited films. Films (80 and 160 nm) annealed at 900, 1100, and 1200 °C for 6 hours after deposition show reduced tetragonal distortion compared to as-deposited films. Further, tetragonal distortion of annealed films with thicknesses of 80 and 160 nm were reduced with decreasing annealing temperature from 1200 °C to 900 °7, while that with a thickness of 40 nm is increased with decreasing annealing temperature. This result indicates that the stress due to lattice mismatch and thermal expansion difference changes as a function of film thickness.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 541: Symposium O – Ferroelectric Thin Films VII , 1998 , 705
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pulsed Laser Deposition of Thin Films edited by Chrisey, D.B. and Hubler, G.K., John Wiley & Sons, Inc., New York (1994).Google Scholar
2. Horwitz, J.S., Chang, W., Carter, A.C., Pond, J.M., Kirchoefer, S.W., Chrisey, D.B., Levy, J. and Hubert, C., Integrated Ferroelectrics 22, 279 (1998).Google Scholar
3. Chang, W., Horwitz, J.S., Carter, A.C., Pond, J.M., Kirchoefer, S.W., Gilmore, C.M. and Chrisey, D.B., Applied Physics Letters (1998). -acceptedGoogle Scholar
4. Wu, H.D., and Barnes, F.S., Integrated Ferroelectrics 22, 291 (1998).Google Scholar
5. Wilcox, N., Ravikumar, V., Rodrigues, R.P., Dravid, V.P., Vollmann, M., Waser, R., Soni, K.K., and Adriaens, A.G., Solid State lonics 75, 127 (1995).Google Scholar
6. Herner, S.B., Selmi, F.A., Varadan, V.V., and Varadan, V.K., Materials Letters 15, 317 (1993).Google Scholar
7. Abe, K., and Komatsu, S., J. Appl. Phys. 77, 6461 (1995).Google Scholar
8. Chang, C.A., and Segmfiller, A., J. Vac. Sci. Technol. 16(2), 285 (1979).Google Scholar
9. Chopra, K.L., Thin Film Phenomena (McGraw-Hill, New York, 1971), Chap. 5.Google Scholar
10. Handbook of Chemistry and Physics 76th edition edited by Lide, D.R., CRC press (1995).Google Scholar
11. Langjahr, P.A., Lange, F.F., Wagner, T., and Rühle, M., Acta Mater. 46, 773 (1998).Google Scholar
12. Basson, J.H., and Booyens, H., Phys. Stat. Sol. (a) 80, 663 (1983).Google Scholar
13. JCPDS card #39-1395 for bulk Ba0.5Sr0.5TiO3(a = 3.947 10 Å).Google Scholar