Hostname: page-component-78c5997874-t5tsf Total loading time: 0 Render date: 2024-11-08T05:14:44.623Z Has data issue: false hasContentIssue false
  • English
  • Français

Laser Densification of Sol-Gel Coatings

Published online by Cambridge University Press:  28 February 2011

D.J. Taylor ,
B.D. Fabes  and
M.G. Steinthal
D.J. Taylor
Affiliation:
University of Arizona, Department of Materials Science and Engineering, Tucson, Arizona 85721
B.D. Fabes
Affiliation:
University of Arizona, Department of Materials Science and Engineering, Tucson, Arizona 85721
M.G. Steinthal
Affiliation:
University of Arizona, Department of Materials Science and Engineering, Tucson, Arizona 85721
Get access

Abstract

Alkoxide-derived silica coatings were deposited on fused silica by dip coating. The samples were covered with a metal film to absorb the infrared radiation from an Nd:YAG laser. Coupling the laser power to the coating produced localized surface heating on the samples. By scanning the sample across the beam's path, channels in the coating were formed. The channels varied from 150 μm to 600 μm wide and from 200Å to 1000Å deep depending on the laser power and the translation speed. The size and shape of the channels also depended on the composition of the sol-gel coating. Optical microscopy showed that there were no cracks in either the substrate or in the coating on the micron scale. SEM revealed cracks on the nanometer scale in the laser fired coatings and no cracks in the unfired coatings. Ellipsometry showed that the index of refraction increased with increasing depth of the channels.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 180: Symposium A – Better Ceramics Through Chemistry IV , 1990 , 1047
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Uhlmann, D.R. and Rajendran, G.P., in Ultrastructure Processing of Advanced Ceramics, edited by Mackenzie, J.D. and Ulrich, D.R. (John Wiley and Sons, 1988), p. 241.Google Scholar
2. Fabes, B.D. and Uhlmann, D.R., in Innovations in Materials Processing Using Aqueous. Colloid and Surface Chemistry, edited by Doyle, F.M., Raghavan, S., Somasundaran, P. and Warren, G.W. (1988), p. 127.Google Scholar
3. Hench, L., from Fourth International Conference on Ultrastructure Processing of Ceramics, Glasses, and Composites, in Tucson, Arizona (Feb. 1989).Google Scholar
4. Keefer, K.D., in Mat. Res. Soc. Symp. Proc. 32 (Elsevier Science Publishers, New York, 1984), p. 15.Google Scholar