Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-30T23:55:16.312Z Has data issue: false hasContentIssue false

Irradiation behaviour of Precipitation Hardened Ni-base Super-alloys with EHP Grade under Multi-ion Irradiation

Published online by Cambridge University Press:  15 March 2011

Gwang-Ho Kim
Affiliation:
Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195, Japan
Kiyoyuki Shiba
Affiliation:
Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195, Japan
Tomotsugu Sawai
Affiliation:
Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195, Japan
Ikuo Ioka
Affiliation:
Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195, Japan
Kiyoshi Kiuchi
Affiliation:
Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195, Japan
Get access

Abstract

The irradiation behaviour in two different precipitation hardening types of Ni-base alloys with the ultra high purity grade (EHP), namely, the γ’ type and G phase type was investigated by multi-ion beam techniques simulated to the irradiation conditions in fuel cladding tubes used in sodium cooled FBRs. Single ion-beam irradiation tests were conducted up to 90 dpa (by Fe3+ or Ni3+) at 673 K. Triple ion-beam irradiation tests were conducted up to 90 dpa (by Ni3+, 90 appmHe and 1350 appmH) at 823K. The irradiation behaviour was examined by and the microscopic observation by TEM to the distribution of dislocations, cavities and voids. The behaviour was compared with those of PNC316. The dominating irradiation defects in EHP(γ’) alloy at 673 K by single ion-beam are Frank loops, perfect unfaulted loops and line dislocations. Whereas, those of EHP(WSi) alloy are the irradiation-induced γ’ (Ni3Si) precipitates along {111} planes. Those dominating defect structures at 823 K by triple ion-beam are classified as followings, bimodal distributions in EHP(γ’), bubbles in EHP(WSi) and voids in PNC316. From those results, the excellent irradiation properties of EHP(WSi) alloy is clarified as the inhibition effects of secondary irradiation defects.

Type
Articles
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Chin, B. A. et al. , Nucl. Tech. 57, 426 (1982)Google Scholar
2. Yang, W. J. S., Gelles, D. S., Straalsund, J. L. and Bajaj, R., J. Nucl. Mater. 132, 249265 (1985)Google Scholar
3. Yang, W. J. S., J. Nucl. Mater. 108/109, 339 (1982)Google Scholar
4. Bond, G. M. and Mazey, D. J., Nucl. Instr. Meth. 209/210, 381 (1983)Google Scholar
5. Mazey, D. J., Hanks, W. and Tithmarsh, J. M., J. Nucl. Mater. 160, 153165 (1988)Google Scholar
6. Mazey, D. J., Bolster, D. E. J. and Hanks, W., J. Nucl. Mater. 172, 1930 (1990)Google Scholar
7. Kiuchi, K., Ide, H. and Ishiyama, T., “Characteristics of high wear resistant Ni-base materials strengthened by precipitation hardening of wolfram silicide”, Proceeding of the Int. Work. on Aging Materials and Aging Structures in Nuclear and Other Environments, Washington, USA, Sep. 25, 3948 (1997)Google Scholar
8. Biersack, J. P. and Haggmark, L. G., Nucl. Instr. Meth. 174, 257 (1980)Google Scholar
9. Brager, H. R. and Straalsund, J. L., J. Nucl. Mater. 46, 134 (1973)Google Scholar
10. Barbu, A. and Ardell, A. J., Scripta Metallurgica, 9, 12331237 (1975)Google Scholar
11. Garner, F. A. and Wolfer, W. G., J. Nucl. Mater. 102, 143 (1981)Google Scholar