Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-24T17:40:55.803Z Has data issue: false hasContentIssue false
  • English
  • Français

Improvement in pinpin Device Architectures for Imaging Applications

Published online by Cambridge University Press:  01 February 2011

P. Louro ,
A. Fantoni ,
M. Fernandes ,
G. Lavareda ,
N. Carvalho  and
M. Vieira
P. Louro
Affiliation:
[email protected], ISEL, DEETC, R. Conselheiro Emídio Navarro, 1, Lisbon, 1959-007, Portugal
A. Fantoni
Affiliation:
[email protected], ISEL, DEETC, R. Conselheiro Emídio Navarro, 1, Lisbon, 1959-007, Portugal
M. Fernandes
Affiliation:
[email protected], ISEL, DEETC, R. Conselheiro Emídio Navarro, 1, Lisbon, 1959-007, Portugal
G. Lavareda
Affiliation:
DCM, Caparica, 2829-516, Portugal
N. Carvalho
Affiliation:
[email protected], DCM, Caparica, 2829-516, Portugal
M. Vieira
Affiliation:
[email protected], ISEL, DEETC, Rua Conselheiro Emidío Navarro, Lisbon, 1900-019, Portugal, +351218317180, +351218317114
Get access

Abstract

In this paper we present results on the optimization of device architectures for colour and imaging applications, using a device with a TCO/pinpi'n'/TCO configuration. A set of different devices with different intrinsic back layers are analysed.

The effect of the applied voltage on the color selectivity is discussed. Results show that the spectral response curves demonstrate rather good separation between the red, green and blue basic colors. Combining the information obtained under positive and negative applied bias a colour image is acquired without colour filters or pixel architecture. A low level image processing algorithm is used for the colour image reconstruction.

Keywords

semiconductingsensoroptoelectronic
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1066: Symposium A – Amorphous and Polycrystalline Thin-Film Silicon Science and Technology—2008 , 2008 , 1066-A18-02
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cesare, G. de, Irrera, F. Lemmi, F. Palma, F. IEEE Trans. on Electron Devices, Vol. 42, No. 5, May 1995, pp. 835–840.Google Scholar
2. Zhu, A. Coors, S. Schneider, B. Rieve, P. Bohm, M. IEEE Trans. on Electron Devices, Vol. 45, No. 7, July 1998, pp. 1393–1398.Google Scholar
3. Mulato, M. Lemmi, F. Ho, J. Lau, R. Lu, J. P. Street, R. A. J. of Appl. Phys., Vol. 90, No. 3 (2001), pp. 1589–1599.Google Scholar
4. Stiebig, H. Gield, J. Knipp, D. Rieve, P. Bohm, M. Mat. Res. Soc. Symp. Proc 337 (1995) 815–821.Google Scholar
5. Vieira, M. Fernandes, M. Martins, J. Louro, P. Maçarico, A., Schwarz, R. Schubert, M. IEEE Sensors Journal, 1 (2) (2001) 158–167.Google Scholar
6. Louro, P. Vieira, M. Fantoni, A. Fernandes, M. Carvalho, C. Nunes, Lavareda, G. Sensors and Actuators A 123-124 (2005) 326–330.Google Scholar
7. Louro, P. Vieira, M. Vygranenko, Y. Fernandes, M. Garção, A., Mat. Res. Soc. Symp. Proc., S. Francisco, 989 (2007) A12.04.Google Scholar