Hostname: page-component-78c5997874-g7gxr Total loading time: 0 Render date: 2024-11-03T08:56:43.013Z Has data issue: false hasContentIssue false
  • English
  • Français

Hydrogenated Amorphous Silicon Speed Sensor Based on the Flying Spot Technique

Published online by Cambridge University Press:  15 February 2011

M. Vieira ,
A. Fantoni ,
A. Maçarico ,
F. Soares ,
G. Evans  and
R. Martins
M. Vieira
Affiliation:
FCT-UNL/UNINOVA, Quinta da Torre, 2825 Monte da Caparica, PORTUGAL
A. Fantoni
Affiliation:
FCT-UNL/UNINOVA, Quinta da Torre, 2825 Monte da Caparica, PORTUGAL
A. Maçarico
Affiliation:
FCT-UNL/UNINOVA, Quinta da Torre, 2825 Monte da Caparica, PORTUGAL
F. Soares
Affiliation:
FCT-UNL/UNINOVA, Quinta da Torre, 2825 Monte da Caparica, PORTUGAL
G. Evans
Affiliation:
FCT-UNL/UNINOVA, Quinta da Torre, 2825 Monte da Caparica, PORTUGAL
R. Martins
Affiliation:
FCT-UNL/UNINOVA, Quinta da Torre, 2825 Monte da Caparica, PORTUGAL
Get access

Abstract

In the past we have developed a transient technique, called the Flying Spot Technique (FST). FST allows, not only to infer the ambipolar diffusion length but also the effective lifetime of the photogenerated carriers once the light spot velocity and geometry of the structure were known.

In this paper, we propose to apply this technique backwards in order to detect the path and velocity of an object that is moving in the direction of a light source. The light reflected back from the object is analyzed through a p.i.n structure being the transient transverse photovoltage dependent on the movement of the object (position and velocity). Assuming that the transport properties of the material and the geometry of the device are known and using a triangulation method we show that it is possible to map the movement of the object. Details concerning material characterization, simulation and device geometry are presented.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 377: Symposium A – Amorphous Silicon Technology 1995 , 1995 , 839
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Torkel, J., Wallmark, , ′Proc. IRE, 43, p. 474 (1956).Google Scholar
[2] Fortunato, E., Vieira, M., Ferreira, L., Carvalho, C. N., Lavareda, G. and Martins, R., Proc. MRS Spring Meeting, Vol. 297, p. 981 (1993).Google Scholar
[3] Martins, R., Vieira, M., Soares, F. and Guimarães, L.:, in Proc. PVSEC-5 (Kyoto, 1990) p. 975.Google Scholar
[4] Chen, Inan, J. Appl. Phys. 64, p. 2224 (1988).Google Scholar
[5] Lucovsky, G., J. Appl. Phys. 31, p. 1088 (1960).Google Scholar
[6] Connor, W., IEEE transaction on electron devices, ED-18, p. 591 (1971).Google Scholar
[7] Noorlag, D. J. W., PhD thesis, Delft, University of Technology (1982).Google Scholar
[8] Woltring, H. Y., IEEE transaction on electron devices, p. 581 (1975).Google Scholar
[9] Fantoni, A., Internal report.Google Scholar
[10] Vieira, M., PhD thesis, FCT/UNL (1993).Google Scholar
[11] Vieira, M., Martins, R., Fortunato, E. and Guimarães, L., J. of Non-Cryst. Sol. 137&138, (1991) 479.Google Scholar
[12] Fantoni, A., Vieira, M., and Martins, R., Proc. MRS Spring Meeting, Vol. 336, p. 711 (1994).Google Scholar
[13] Martins, R. and Fortunato, E., to be published on Rev. on Scientific Instruments (1995).Google Scholar