Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-24T15:45:54.900Z Has data issue: false hasContentIssue false
  • English
  • Français

High Temperature Stability of Silver Based Porous Nanocomposites for Electrochemical Devices

Published online by Cambridge University Press:  13 May 2013

Ayhan Sarikaya ,
Vladimir Petrovsky  and
Fatih Dogan
Ayhan Sarikaya
Affiliation:
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409, U.S.A.
Vladimir Petrovsky
Affiliation:
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409, U.S.A.
Fatih Dogan
Affiliation:
Department of Materials Science and Engineering, Missouri University of Science and Technology, Rolla, MO 65409, U.S.A.
Get access

Abstract

High temperature (>550°C) applications of silver based porous composites have been limited due to relatively low melting temperature (962°C) of Ag. Incorporation of oxide particles was demonstrated as an effective approach for stabilization of the porous Ag microstructures. This study aims developing an understanding based on the relationships between the properties of the incorporated YSZ (yttria-stabilized zirconia), the developed porous microstructures and the electrochemical response of their electrodes. Minimum degradation was observed with the composite microstructure based on comparable Ag and YSZ particle sizes. The results demonstrated that YSZ incorporation into Ag matrix can increase the stable application temperature to 800°C.

Keywords

Agcompositemicrostructure
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1542: Symposium G – Electrochemical Interfaces for Energy Storage and Conversion— Fundamental Insights from Experiments to Computations , 2013 , mrss13-1542-g05-13
Copyright
Copyright © Materials Research Society 2013 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Sarikaya, A., Petrovsky, V. and Dogan, F., in In-Situ Studies of Solid-Oxide Fuel-Cell Materials, edited by Maher, R., (Mater. Res. Soc. Symp. Proc. 1385, Warrendale, PA, 2012).Google Scholar
Sarikaya, A., Petrovsky, V. and Dogan, F., J. Mater. Res., 27, 2024 (2012).CrossRefGoogle Scholar
Camaratta, M. and Wachsman, E.D., Solid State Ionics, 178, 1242 (2007).CrossRefGoogle Scholar
Yang, Z., Weil, K.S., Paxton, D.M. and Stevenson, J.W., J. Electrochem. Soc. 150, A1188 (2003).CrossRefGoogle Scholar
Sheppard, T.B. and Kang, B.S.J., in Proceedings of Materials Science and Technology Conference (MS&T) 2007, (PV 2007-2, Detroit, MI, USA, 2007) p. 1209.Google Scholar
Singh, P., Yang, Z., Viswanathan, V., and Stevenson, J.W., J. Mater. Eng. Perform. 13, 287 (2004).CrossRefGoogle Scholar