Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-24T14:39:31.923Z Has data issue: false hasContentIssue false
  • English
  • Français

High Temperature Deformation Behavior of a Mechanically Alloyed Mo Silicide Alloy

Published online by Cambridge University Press:  26 February 2011

Martin Heilmaier ,
Holger Saage ,
Pascal Jéhanno ,
Mike Böning  and
Jens Freudenberger
Martin Heilmaier
Affiliation:
[email protected], University Magdeburg, Institute for Materials & Joining Technology, Grosse Steinernetischstrasse 6, Magdeburg, D-39016 Magdeburg, Germany, +493916714596, +493916714569
Holger Saage
Affiliation:
[email protected], University Magdeburg, Institute for Materials & Joining Technology, Grosse Steinernetischstrasse 6, Magdeburg, D-39016 Magdeburg, Germany
Pascal Jéhanno
Affiliation:
[email protected], Plansee SE, Technology Centre, Reutte/Tyrolia, A-6600, Austria
Mike Böning
Affiliation:
[email protected], Plansee SE, Technology Centre, Reutte/Tyrolia, A-6600, Austria
Jens Freudenberger
Affiliation:
[email protected], Leibniz-Institut fuer Festkoerper- und Werkstoffforschung Dresden, Helmholtzstr. 20, Dresden, D-01069, Germany
Get access

Abstract

A 3-phase Mo-Si-B alloy consisting of Mo solid solution and the intermetallic phases Mo3Si and Mo5SiB2 (T2) was manufactured employing mechanical alloying (MA) as the crucial processing step. After consolidation via cold compaction, sintering in hydrogen atmosphere and final hot isostatic pressing (HIP) at 1500°C, one obtains an ultra-fine microstructure with a nearly continuous Mo(ss) matrix and the sizes of all phases being in the 1 micron range. Tensile tests were carried out in vacuum at initial strain rates ranging from 10-4 to 10-2 s-1 and the temperature varied between n1200 an 1400 °C. With a stress exponent of about 2 and the activation energy being close to that of Mo-self diffusion the material exhibits superplasticity at temperatures as low as 1300°C and tensile strain to failures up to 400%, thus, making sound wrought processing on industrial-scale facilities at temperatures typical for refractory metals and alloys feasible. To enhance creep resistance at high temperatures the alloys were annealed at 1700°C for 10h for a coarsening of the microstructure. While, still, the average sizes of all phases were below 10 microns, a considerable reduction in minimum creep rate was noted. This finding also demonstrates the extraordinary high thermal stability of this 3-phase Mo-silicide alloy.

Keywords

Mosuperplasticitymechanical alloying
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 980: Symposium II – Advanced Intermetallic-Based Alloys , 2006 , 0980-II06-06
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Berczik, D.M., US Patent 5,595,616 (1997).Google Scholar
2. Parthasarathy, T.A., Mendiratta, M., Dimiduk, D.M., Acta Mater. 50, 1857 (2002).Google Scholar
3. Jéhanno, P., Heilmaier, M., Kestler, H., Böning, M., Venskutonis, A., Bewlay, B., Jackson, M., Metall. Mater. Trans. 36A, 515 (2005).Google Scholar
4. Jéhanno, P., Heilmaier, M., Kestler, H., Intermetallics 12, 1005 (2004).Google Scholar
5. Nunes, C.A., Sakidja, R., Dong, Z., Perepezko, J.H., Intermetallics 8, 327 (2000).Google Scholar
6. Berczik, D.M., US Patent 5,693,156, (1997).Google Scholar
7. Krüger, M., Franz, S., Saage, H., Heilmaier, M.: in preparation for Intermetallics.Google Scholar
8. Jéhanno, P., Heilmaier, M., Saage, H., Heyse, H., Böning, M., Kestler, H., Schneibel, J. H., Scripta Mater. 55, 525 (2006).Google Scholar
9. Sherby, O.D. and Wadsworth, J., Prog. Mater. Sci. 33, 169 (1989).Google Scholar
10. Frost, H.J., Ashby, M.F., Deformation-Mechanism-Maps, in: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.Google Scholar
11. Alur, A.P., Chollacoop, N., Kumar, K.S., Acta Mater. 52, 5571 (2004).Google Scholar
12. Bewlay, B.P., Jackson, M.R., Zhao, J.-C., Subramanian, P.R., Mendiratta, M.G., Lewandowski, J.J., MRS Bulletin 28, 646 (2003).Google Scholar