Published online by Cambridge University Press: 22 February 2011
Silicon films were deposited on a fluororesin surface. The process was divided into two steps: surface modification process and silicon CVD onto the modified parts. In the modification process, SiH4 and B(CH3)3 mixed gases were used with ArF excimer laser. Fluorine atoms of the surface were pulled out by boron atoms which were photo—dissociated from B(CH3)3 and were replaced with silicon atoms released from SiH4. In the CVD process, SiH4 gas was used with high—density excited ArF excimer laser. Silicon films were deposited onto the nuclei by photodecomposition of SiH4.
Chemical compositions of the modified layers and the deposited parts were inspected by XPS analysis. 1000 Å thickness of the deposited silicon films was confirmed by the surface roughness interference–meter.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.