Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-24T23:38:32.925Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Organic Thin Film Transistor Based on the Ink-Jet Printed Electrodes of Nano Silver Particles

Published online by Cambridge University Press:  01 February 2011

Dongjo Kim ,
Sunho Jeong ,
Sul Lee ,
Bong-Kyun Park  and
Jooho Moon
Dongjo Kim
Affiliation:
[email protected], Yonsei University, Department of Materials Science and Engineering, Shinchon-dong 134, Seodaemoon-gu, Seoul, N/A, N/A, Korea, Republic of
Sunho Jeong
Affiliation:
[email protected], Yonsei University, Department of Materials Science and Engineering, 134 Shinchon-dong, Seodaemun-ku, Seoul, N/A, 120-749, Korea, Republic of
Sul Lee
Affiliation:
[email protected], Yonsei University, Department of Materials Science and Engineering, 134 Shinchon-dong, Seodaemun-ku, Seoul, N/A, 120-749, Korea, Republic of
Bong-Kyun Park
Affiliation:
[email protected], Yonsei University, Department of Materials Science and Engineering, 134 Shinchon-dong, Seodaemun-ku, Seoul, N/A, 120-749, Korea, Republic of
Jooho Moon
Affiliation:
[email protected], Yonsei University, Department of Materials Science and Engineering, 134 Shinchon-dong, Seodaemun-ku, Seoul, N/A, 120-749, Korea, Republic of
Get access

Abstract

In this work, we here developed a conductive ink which contains silver nano-particles from which the electrodes for organic thin film transistor were directly patterned by ink-jet printing. Nano-sized silver particles having ∼ 20nm diameter was used for the direct metal printing. Silver conductive ink was printed on the heavily doped n-type silicon wafer with 200-nm thick thermal SiO2 layer as a substrate. To achieve a high line resolution and smooth conductive path, the printing conditions such as the inter-drop distance, stage moving velocity and temperature of the pre-heated substrates were optimized. After the heat-treatment at temperatures of about 100 ∼ 300 ° for 30 min, the printed silver patterns exhibit metal-like appearance and the conductivity. To fabricate a coplanar type TFTs, an active material of semiconducting polymer, which was dissolved in a proper solvent, was deposited between the ink-jet printed silver electrodes by solution process. The output and transfer characterization was measured in air. The OTFT with the ink-jetted source/drain electrodes show a mobility of 1.3 × 10−3 cm2 V−1 s−1 in the saturation regime and on/off current ratio over 103 and a threshold voltage of about −13 V.

Keywords

ink-jet printingAgdevices
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 937: Symposium M – Conjugated Organic Materials – Synthesis, Structure, Device, and Applications , 2006 , 0937-M10-42
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Huang, D., Liao, F., Molesa, S., Redinger, D. and Subramanian, V., J. Electrochem. Soc. 150, G412 (2003).Google Scholar
2 Kamyshny, A., Ben-Moshe, M., Aviezer, S. and Magdassi, S., Macromol. Rapid Commun. 26, 281 (2005).Google Scholar
3 Dimitrakopoulos, C. D. and Mascaro, D. J., Adv. Mater. 14, 99 (2002).Google Scholar
4 Afzali, A., Dimitrakopoulos, C. D. and Breen, T. L., J. Am. Chem. Soc. 124, 8812 (2002).Google Scholar
5 Silvert, P. -Y., Herrera-Urbina, R., Duvauchelle, N., Vijayakrishnan, V. and TekaiaElhsissen, K., J. Mater. Chem. 7, 293 (1997).Google Scholar
6 Buffat, P. and Borel, J-P., Phys. Rev. A 13, 2287 (1976).Google Scholar
7 Allen, G. L., Bayles, R. A., Gile, W. W. and Jesser, W. A., Thin Solid Films 144, 297 (1986).Google Scholar
8 Jiang, Q., Zhang, S. and Zhao, M., Mater. Chem. Phys. 82, 225 (2003).Google Scholar