Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-28T08:36:54.611Z Has data issue: false hasContentIssue false

Enabling Aspects of Metal Halide Nanocomposites for Reversible Energy Storage

Published online by Cambridge University Press:  26 February 2011

Fadwa Badway
Affiliation:
[email protected], Rutgers, The State University of New Jersey, 671 Route 1 South, North Brunswick, NJ, 08902, United States
Azzam Mansour
Affiliation:
[email protected], Naval Surface Warfare Center, West Bethesda, MD, 20817, United States
Irene Plitz
Affiliation:
[email protected], Rutgers, The State University of New Jersey, North Brunswick, NJ, 08902, United States
Nathalie Pereira
Affiliation:
[email protected], Rutgers, The State University of New Jersey, North Brunswick, NJ, 08902, United States
Larry Weinstein
Affiliation:
[email protected], Rutgers, The State University of New Jersey, North Brunswick, NJ, 08902, United States
William Yourey
Affiliation:
wmyourey@eden. rutgers.edu, Rutgers, The State University of New Jersey, North Brunswick, NJ, 08902, United States
Glenn G Amatucci
Affiliation:
[email protected], Rutgers, The State University of New Jersey, North Brunswick, NJ, 08902, United States
Get access

Abstract

The concept of reversible and non reversible conversion in high bandgap metal fluorides is expanded through the introduction of mixed conducting matrices to form dense nanocomposite structures capable of good transport to nanodomains of metal fluorides. Specific examples for BiF3 and especially CuF2 using matrices of nominal composition of MoO3 are discussed. The reversible conversion mechanism of the metal halides is expanded to enable a new concept of electrochemically self assembled microbatteries (ESAMs) based on alkali halides. Such technology enables the fabrication of a solid state microbattery between two current collectors of various configurations on the microscale. First examples demonstrated based on LiI have demonstrated cell formation, appreciable energy density, and preliminary reversibility.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Poizot, P., Laruelle, S., Grugeon, S., Dupont, L. andTarascon, J.-M., Nature (London), 407 496 (2000)Google Scholar
2. Pereira, N., Balasubramanian, M., Dupont, L., McBreen, J., Klein, L.C. andAmatucci, G.G., J. Electrochem. Soc., 150(8) A1118 (2003)Google Scholar
3. Li, H., Richter, G., Maier, J., Advanced Materials 15, 736 (2003).Google Scholar
4. Badway, F., Pereira, N., Cosandey, F., andAmatucci, G.G., J. Electrochem. Soc., 150, A1209, (2003).Google Scholar
5. Plitz, I., Badway, F., Al-Sharab, J., DuPasquier, A., Cosandey, F., andAmatucci, G.G., J. Electrochem. Soc. 152, A307 (2005).Google Scholar
6. Bervas, M., Badway, F., Jlein, L.C., andAmatucci, G.G., Electrochem. And Solid State Letters, 8, A179 (2005).Google Scholar
7. Bervas, M., Klein, L.C., andAmatucci, G.G., J. Electrochem. Soc., 153, A159 (2006).Google Scholar
8. Bervas, M., Mansour, A.N., Yoon, W.S., Al-Sharab, J., Badway, F., Cosandey, F., Klein, L.C., andAmatucci, G.G., J. Electrochem. Soc., 153, A799 (2006).Google Scholar
9. Bauman, H.F., Proceedings of the 20th Annual Power Sources Conference, PSC Publications, May 1966, p73.Google Scholar