Hostname: page-component-745bb68f8f-g4j75 Total loading time: 0 Render date: 2025-01-27T16:02:10.488Z Has data issue: false hasContentIssue false
  • English
  • Français

Electrical Properties of Tantalum Based Composite Oxide Films

Published online by Cambridge University Press:  22 February 2011

Hannu Kattelus ,
Markku Ylilammi ,
Jorma Salmi ,
Timo Ranta-Aho ,
Erjany Kanen  and
Andilkka Suni
Hannu Kattelus
Affiliation:
VTT Semiconductor Laboratory, Otakaari 7 B, SF-02150 Espoo, Finland
Markku Ylilammi
Affiliation:
VTT Semiconductor Laboratory, Otakaari 7 B, SF-02150 Espoo, Finland
Jorma Salmi
Affiliation:
VTT Semiconductor Laboratory, Otakaari 7 B, SF-02150 Espoo, Finland
Timo Ranta-Aho
Affiliation:
VTT Semiconductor Laboratory, Otakaari 7 B, SF-02150 Espoo, Finland
Erjany Kanen
Affiliation:
VTT Semiconductor Laboratory, Otakaari 7 B, SF-02150 Espoo, Finland
Andilkka Suni
Affiliation:
VTT Semiconductor Laboratory, Otakaari 7 B, SF-02150 Espoo, Finland
Get access

Abstract

Tantalum oxide is a widely used insulator in electronic applications requiring high permittivity. When deposited at low temperature, tantalum oxide films, however, often exhibit large leakage current. A common way to reduce leakage is to anneal the films in an ambient containing extremely reactive oxygen species, or at high temperature in dry oxygen. A different approach is to use composite oxide materials. We have studied layered tantalum based oxide films deposited by Atomic Layer Epitaxy, and observed that the leakage current is decreased by several orders of magnitude when a fraction of tantalum oxide is replaced by another oxide, such as aluminum or hafnium oxide. Leakage current density of 40 nA/cm2 in the electric field of 1 MV/cm is attained for unannealed Ta-Hf-O film deposited at 300°C. Layered composite insulators are an interesting new class of materials, and ALE proves to be a useful method for depositing them.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 284: Symposium G – Amorphous Insulating Thin Films , 1992 , 511
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Singer, P., Semiconductor International, September 1992. 32.Google Scholar
2. Shinriki, H. and Nakata, M., IEEE Trans. Electron Devices 38 (3), 455–462 (1992).Google Scholar
3. Kattelus, H. et al., presented at the 2nd International Symposium on Atomic Layer Epitaxy, Raleigh, NC, USA, June 2–5, 1992, to be published in Thin Solid Films.Google Scholar
4. Kamiyama, S. et al., Extended Abstracts of the 1992 International Conference on Solid State Devices and Materials, Tsukuba, 1992, 521–523.Google Scholar
5. Murawala, P. A. et al., Extended Abstracts of the 1992 International Conference on Solid State Devices and Materials, Tsukuba, 1992, 527–529.Google Scholar
6. Hiltunen, L. et al., Mater. Chem Phys. 28, 379–388 (1991).Google Scholar
7. Kuo, C. T., Kwor, R. and Jones, K. M., Thin Solid Films 213, 257 – 264 (1992).Google Scholar
8. de Jongh, W. K., Uniquant User Manual Version 1.53, Omega Data Systems bv, Veldhoven 1991.Google Scholar
9. Hsu, C. T., Su, Y. K., and Yokoyama, M., Jpn. J. Appl. Phys., Part 1, 31 (8), 2501–2504 (1992).Google Scholar