Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-28T12:58:51.388Z Has data issue: false hasContentIssue false

Effects of air and light exposure on the opto-electronic properties of polymer:fullerene solar cells

Published online by Cambridge University Press:  02 March 2011

Antonietta De Sio
Affiliation:
Energy and Semiconductor Research Laboratory, Institute of Physics, Carl von Ossietzky University of Oldenburg, 26111 Oldenburg, GERMANY
Enrico Da Como
Affiliation:
Photonics and Optoelectronics Group, Department of Physics and CeNS, Ludwig-Maximilians-University Munich, Munich 80799, Germany
Elizabeth von Hauff
Affiliation:
Energy and Semiconductor Research Laboratory, Institute of Physics, Carl von Ossietzky University of Oldenburg, 26111 Oldenburg, GERMANY
Jürgen Parisi
Affiliation:
Energy and Semiconductor Research Laboratory, Institute of Physics, Carl von Ossietzky University of Oldenburg, 26111 Oldenburg, GERMANY
Get access

Abstract

In this study we investigate how exposure to ambient air and light during device processing affects the opto-electronic properties of poly-3-hexylthiophene (P3HT) : [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) bulk heterojunction solar cells (BHJ). The properties of pure P3HT layers prepared in an inert atmosphere, under ambient conditions, and additionally degraded under light in ambient conditions were investigated using photoluminescence (PL) and photoinduced absorption (PIA). It was observed that exposure to air during processing leads to oxygen doping of the polymer. Exposure to air combined with light was found to significantly decrease the PL and PIA signals. The current-voltage (I-V) and external quantum efficiency (EQE) characteristics of solar cells fabricated in an inert atmosphere were compared to solar cells processed under ambient conditions. It was observed that processing in air leads to a reduction in the photocurrent in the devices which is attributed to electron trapping by oxygen in the active layer.

Type
Research Article
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Yu, G., Gao, J., Hummelen, J. C., Wudl, F. and Heeger, A. J., Science, 207, 1789 (1995).Google Scholar
2. Sariciftci, N. S., Smilowitz, L., Heeger, A. J. and Wudl, F., Science, 258, 1474 (1992).Google Scholar
3. Chen, H. Y., Hou, J. H., Zhang, S. Q., Liang, Y. Y., Yang, G. W., Yang, Y., Yu, L. P., Wu, Y. and Li, G., , G.. Nat. Photonics, 3, 649 (2009).Google Scholar
4. Liang, Y., Xu, Z., Xia, J., Tsai, S.-T., Wu, Yue, Li, Gang, Ray, Claire and Yu, Luping Adv. Mater., 22, E135E138 (2010).Google Scholar
5. Lüer, L., Egelhaaf, H.-J., Oelkrug, D., Cerullo, G., Lanzani, G., Huisman, B.-H. and de Leeuw, D., Org. Electron. 5, 83 (2004).Google Scholar
6. Seemann, A., Egelhaaf, H.-J., Brabec, C. J., Hauch, J. A., Organic Electronics, 10, 1424, (2009)Google Scholar
7. Seemann, A., Sauermann, T., Lungenschmied, Ch., Armbruster, O., Bauer, S., Egelhaaf, H.-J. and Hauch, J., Sol. Energy, in press.Google Scholar
8. Hintz, H., Egelhaar, H.J., Peisert, H., Chasse, T., Polym. Degrad. Stabil., 95, 818, (2010)Google Scholar
9. Österbacka, R., An, C. P., Jiang, X. M., Vardeny, Z. V., Science, 287, 839, (2000).Google Scholar