Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-12-01T00:00:30.986Z Has data issue: false hasContentIssue false

Effect of ZnO Coating on the Electrochemical Performance of LiMn1.5Ni0.5O4 Cathode Material

Published online by Cambridge University Press:  26 February 2011

Rahul Singhal
Affiliation:
[email protected], University of Puerto Rico, Physics, P.O. Box 9016, Mayaguez, 00680, Puerto Rico, 1-787-832-4040 Ext 2595, 1-787-832-1135
Maharaj S Tomar
Affiliation:
[email protected], University of Puerto Rico, Physics, P.O.Box 9016, Mayaguez, 00680, Puerto Rico
Juan G Burgos
Affiliation:
[email protected], University of Puerto Rico, Physics, P.O. Box 23343, San Juan, 00931, Puerto Rico
Arun Kumar
Affiliation:
[email protected], University of Puerto Rico, Physics, P.O. Box 23343, San Juan, 00931, Puerto Rico
Ram S Katiyar
Affiliation:
[email protected], University of Puerto Rico, Physics, P.O. Box 23343, San Juan, 00931, Puerto Rico
Get access

Abstract

LiMn1.5Ni0.5O4 cathode material was prepared by sol-gel method and annealed at 850°C for 15 hrs. The prepared powder was coated with ZnO by dissolving zinc acetate in methanol and LiMn1.5Ni0.5O4 powder was mixed in this solution followed by the continuous stirring for 4 hr. The LiMn1.5Ni0.5O4 and ZnO coated LiMn1.5Ni0.5O4 powder was characterized using X-ray diffraction, TEM and Raman spectroscopy. The coin cell was fabricated using LiMn1.5Ni0.5O4 and ZnO coated LiMn1.5Ni0.5O4 as cathode materials, LiPF6, dissolved in EC/DMC (1:1 wt ratio) as electrolyte, and Li foil as anode. The cyclic voltammetric and charge-discharge characteristics were carried out for the coin cell using LiMn1.5Ni0.5O4 and ZnO coated LiMn1.5Ni0.5O4 cathode materials. It was found that the ZnO coated LiMn1.5Ni0.5O4 cathode materials showed improved discharge capacity (∼146mAh/g) as compared to the pure LiMn1.5Ni0.5O4 (∼140mAh/g). The discharge capacity retention after 50 cycles was found to be about 94% and 97% for LiMn1.5Ni0.5O4 and ZnO coated LiMn1.5Ni0.5O4 cathode materials, respectively.

Type
Research Article
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Pasquier, Du, Disma, F., Bowmer, T., Gozdz, A. S., Amatucci, G., and Tarascon, J-M., J. Electrochem. Soc., 145, 472 (1998).Google Scholar
2. Goodenough, J.B., Mizushima, K., Takeda, T., Jpn. J. Appl. Phys. 19, 305 (1980).Google Scholar
3. Sekai, K., Azuma, H., Omaru, A., Fujita, S., J. Power Sources 43, 241 (1993).Google Scholar
4. MacNeil, D. D. and Dahn, J. R., J. Electrochem. Soc., 149 (7), A912 (2002).Google Scholar
5. MacNeil, D. D., Hatchard, T. D. and Dahn, J. R. J. Electrochem. Soc., 148 (7), A663 (2001).Google Scholar
6. Buhrmester, C., Chen, J., Moshurchak, L., Jiang, J., Wang, R.L., and Dahn, J.R., J. Electrochem. Soc., 152 (12), A2390 (2005).Google Scholar
7. Wang, Z., Wu, C., Liu, L., Wu, F., Wu, F., Chen, L., Huang, X., J. Electrochem. Soc. 149, A466 (2002).Google Scholar
8. Chen, Z.H., Dahn, J.R., Electrochem. Solid-State Lett. 6, 221 (2003).Google Scholar
9. Xu, H.Y., Xie, S., Zhang, C.P., Chen, C.H., J. Power Sources 148, 90 (2005).Google Scholar
10. Chen, Z.H., Dahn, J.R., Electrochem. Solid-State Lett. 5, 213 (2002).Google Scholar
11. Cho, J., Kim, Y. J., and Park, B., Chem. Mater., 12, 3788 (2000).Google Scholar
12. Wang, Z., Huang, X., and Chen, L., J. Electrochem. Soc. 150(2), A199 (2003).Google Scholar
13. Kim, Y. J., Cho, J., Kim, T.J., Park, B., J. Electrochem. Soc., 150(12), A1723 (2003).Google Scholar
14. Singhal, R., Das, S.R., Oviedo, O., Tomar, M.S. and Katiyar, R.S., J. Power Sources, 160, 651 (2006).Google Scholar
15. Sun, Y.K., Hong, K.J., and Prakash, J., J. Electrochem. Soc., 150(7), A970 (2003).Google Scholar