Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-24T16:04:26.513Z Has data issue: false hasContentIssue false

Effect of Oxygen Pressure During Zno:Al Coating of Zns:Ag Phosphor on Cathodoluminescent Degradation Lifetime

Published online by Cambridge University Press:  15 February 2011

M. Ollinger
Affiliation:
Materials Science and Engineering, University of Florida, Gainesville, FL 32601
V. Craciun
Affiliation:
Materials Science and Engineering, University of Florida, Gainesville, FL 32601
S. Nagore
Affiliation:
Materials Science and Engineering, University of Florida, Gainesville, FL 32601
R.K. Singh
Affiliation:
Materials Science and Engineering, University of Florida, Gainesville, FL 32601
Get access

Abstract

The reduction in cathodoluminescent (CL) degradation of ZnS:Ag phosphor particles coated with aluminum doped zinc oxide (ZAO) films has been investigated. The films were deposited under various oxygen pressures using the atomic flux coating process. The characteristics of the coated phosphor particles with respect to as-received ones were investigated by x-ray photoelectron spectroscopy, CL degradation and scanning electron microscopy. All coated phosphor particles exhibited less CL degradation than the uncoated particles. The coatings deposited under 1.6×10-4 Torr of oxygen, a pressure much lower than the optimum one required to obtain highly transparent and conductive ZnO:Al films, provided the longest brightness lifetime. This increased phosphors lifetime was attributed to the high reactivity of the oxygen deficient ZAO coatings which acted as a sacrificial layer and trapped reactive species before they can reach the phosphor particles and alter their chemical composition.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

references

[1] Candescent, “Thin CRTs.” Candescent, website, http://www.candescent.com/Candescent/showcase.htm; Jan. 30(2002).Google Scholar
[2] Sebastian, J., Jones, S., Trottier, T., Holloway, P. Soc. Inf. Disp. 27, 627 (1995).Google Scholar
[3] Holloway, P.H., Trottier, T.A., Sebastian, J., Jones, S., Zhang, X.-M., Abrams, B., Thomes, W. J., and Kim, T.-J. J. of Appl. Phys. 88, 483 (2000).Google Scholar
[4] Swart, H.C., Hillie, K.T., Surface and Interface Analysis 30, 383 (2000).Google Scholar
[5] Seager, C.H., Tallant, D.R., and Warren, W.L., J. Appl. Phys. 82, 4515 (1997).Google Scholar
[6] Holloway, P.H., Trottier, T.A., Abrams, B., Kondoleon, C., Jones, S.L., Sebastian, J.S., Thomes, W.J., and Swart, H., J. Vac. Sci. Technol. B17, 752 (1999).Google Scholar
[7] Wang, C.W., Sheu, T.J., Su, Y.K., and Yokoyama, M., Appl. Surf. Sci. 113/114, 709 (1997).Google Scholar
[8] Ollinger, M., Craciun, V., and Singh, R.K., Appl. Phys. Lett. 80, 1927 (2002).Google Scholar
[9] Jeong, W.J., and Park, G.C., Solar Eng. Mat. And Solar Cells, 65, 37 (2001).Google Scholar
[10] Craciun, V., Singh, R.K., Perriere, J., Spear, J., and Craciun, D., J. Electrochem. Soc. 147, 1077 (2000).Google Scholar