Article contents
Effect of Alpha Decay on Nuclear Borosilicate Glass Properties
Published online by Cambridge University Press: 17 March 2011
Abstract
The properties of actinide glasses are studied in the context of high-level waste management programs. Reprocessing high burnup fuels in particular will increase the minor actinide content in the glass package, resulting in higher cumulative alpha decay doses in the glass, and raising the question of the glass matrix behavior and especially its containment properties. The effect of alpha self-irradiation on the glass behavior is evaluated by doping the glass with a short-lived actinide (244Cm) to reach in several years the alpha dose received by the future glass packages over several thousand years. “R7T7” borosilicate glasses were doped with 3 different curium contents (0.04 wt%, 0.4 wt% and 1.2 wt% 244CmO2). The glass homogeneity was characterized by SEM and XRD. Chemical analysis after dissolution of the glass confirmed the chemical composition. The curium content and its distribution in the glass specimens were checked by calorimetry measurements and gamma spectrometry on 243Cm and 245Cm isotopes. The density and mechanical properties of the curium-doped glasses were characterized up to 2 × 1018 α/g, revealing only a slight evolution of the macroscopic behavior of R7T7 glass in this range. The leaching behavior of curium-doped glass was also studied by Soxhlet tests. The results do not show any significant evolution of the initial alteration rate with the alpha dose.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2004
References
- 4
- Cited by