Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-24T07:58:23.189Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and Characterization of a Magnetorheological Damper for Vibration Mitigation during Milling of Thin Components

Published online by Cambridge University Press:  02 March 2016

S. Puma-Araujo ,
D. Olvera-Trejo ,
A. Elías-Zuñiga ,
O. Martínez-Romero  and
C.A. Rodríguez
S. Puma-Araujo
Affiliation:
Department of Mechanical Engineering, Tecnológico de Monterrey, ITESM, Eugenio Garza Sada 2501 Sur, Monterrey 64849, Nuevo León, México.
D. Olvera-Trejo
Affiliation:
School of Engineering and Science, Tecnológico de Monterrey, ITESM, Eugenio Garza Sada 2501 Sur, Monterrey 64849, Nuevo León, México.
A. Elías-Zuñiga
Affiliation:
School of Engineering and Science, Tecnológico de Monterrey, ITESM, Eugenio Garza Sada 2501 Sur, Monterrey 64849, Nuevo León, México.
O. Martínez-Romero
Affiliation:
School of Engineering and Science, Tecnológico de Monterrey, ITESM, Eugenio Garza Sada 2501 Sur, Monterrey 64849, Nuevo León, México.
C.A. Rodríguez
Affiliation:
School of Engineering and Science, Tecnológico de Monterrey, ITESM, Eugenio Garza Sada 2501 Sur, Monterrey 64849, Nuevo León, México.
Get access

Abstract

The aerospace and automotive industries demand the development of new manufacturing processes. The productivity during machining of very flexible aerospace and automotive aluminum components is limited for self-excited vibrations. New solutions are needed to suppress vibrations that affect the accuracy and quality of the machined surfaces. Rejection of one piece implies an increase in the manufacturing cost and time. This paper is focused on the design, manufacturing and characterization of a magnetorheological damper. The damper was attached to a thin-floored component and a magnetic field was controlled in order to modify the damping behavior of the system. The dynamics of the machining process was developed by considering a three-degree-of-freedom model. This study was experimentally validated with a bull-nose end milling tool to manufacture monolithic parts with thin wall and thin floor. Experimental tests and characterization of the magnetorheological damper permitted to improve the surface finish and productivity during the machining of thin-floored components. A further aim of this paper was to develop a rheological damper by using magnetorheological fluids (MR) to change the thin floor rigidity with voltage. The stability of the milling process was also analytically described considering one, two or three degrees of freedom, using a mathematical integration model based on the Enhanced Multistage Homotopy Perturbation Method (EMHPM).

Keywords

MachiningFluidMagnetic
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1812: Symposium 6B – Advanced Structural Materials—2015 , 2016 , pp. 65 - 70
Copyright
Copyright © Materials Research Society 2016 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Boeing 787, Composite in the airframe and primary structure, retrieved from http://www.boeing.com/commercial/aeromagazine/articles/qtr_4_06/article_04_2.html.Google Scholar
Sims, N.D. and Zhang, Y., in Smart Structures and Materials 2004: Smart Structures and Integrated Systems , edited by Flatau, Alison B., (Proc. SPIE 5390, Bellingham, WA, 2004), pp. 335–346.Google Scholar
Winfough, W.R. PhD. Thesis, University of Florida, 1995.Google Scholar
Zatarain, M., Bediaga, I., Muñoa, J. and Lizarralde, R., CIRP Ann. Manuf. Techn. 57, 379–384 (2008).CrossRefGoogle Scholar
Segalman, D. and Redmond, J., in Smart Structures and Materials 1996: Industrial and Commercial Applications of Smart Structures Technologies , edited by Crowe, C.R., (Proc. SPIE 2721, Bellingham, WA, 1996), pp. 353–363.Google Scholar
Campa, F. PhD. Thesis, Faculty of Engineering of Bilbao, Universidad del País Vasco (UPV/EHU), Spain, 2010.Google Scholar
Altintas, Y. and Budak, E., CIRP Ann. Manuf. Techn. 44, 717–723 (1995).CrossRefGoogle Scholar
Olvera, D. and Elías-Zúñiga, A., in Proc. of 13th Conference on Nonlinear Vibrations, Dynamics, and Multibody Systems , (Virginia Polytechnic Institute and State University, Blacksburg, VA, 2010).Google Scholar