Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-08T08:15:06.878Z Has data issue: false hasContentIssue false

Crystallization and Nanocrystallization Kinetics of Fe-Based Amorphous Alloys

Published online by Cambridge University Press:  21 February 2011

A. Hsiao
Affiliation:
Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA
Z. Turgut
Affiliation:
Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA
M.A. Willard
Affiliation:
Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA
E. Selinger
Affiliation:
Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA
D.E. Laughlin
Affiliation:
Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA
M.E. Mchenry
Affiliation:
Materials Science and Engineering, Carnegie Mellon University, Pittsburgh, PA
R. Hasegawa
Affiliation:
Allied Signal Corporation, Morristown, NJ
Get access

Abstract

In this work we describe crystallization kinetics as inferred from time-dependent magnetization studies and thermal analysis for an Allied Signal amorphous Fe-based METGLAS® 2605SA-1 alloy and a NANOPERM (Fe88Zr7B4Cu1) alloy. We illustrate and contrast several phenomena important to understanding crystallization kinetics in particular to the NANOPERM alloy system. In METGLAS® 2605SA-1 primary and secondary crystallization events are observed in differential scanning calorimetry data (DSC) at temperatures of 504 °C and 549 °C, respectively for data taken at a 10 °C/min scan rate. Both temperatures are greater than the Curie temperature of the amorphous alloy. For the NANOPERM alloy primary crystallization (as determined from differential thermal analysis (DTA)) occurs at 500 °C and secondary crystallization at 730 °C and M(t) at temperatures near the primary crystallization temperature is dominated (at short times < 1 hour) by the primary crystallization event. Using the Johnson-Mehl-Avrami equation for isothermal transformations and the Kissinger equation for constant heating transformations, we find corresponding models for the crystallization kinetics of the NANOPERM alloy.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Takahara, Yoshihiro, Mat. Trans. JIM-37 (9), 1996), 14531457 (1996).Google Scholar
2. Makino, A., Suzuki, K., Inoue, A., and Masumoto, T., Mat. Sci. Eng. A179/A180, 495, (1994a); 127, (1994b).Google Scholar
3. Suzuki, K., Makino, A., Kataoka, N., Inoue, A., and Masumot, T.o;,Mat. Trans. JIM-32, 93, (1991).Google Scholar
4. Makino, A., Hatanai, T., Naitoh, Y., Bitoh, T., Inoue, A., and Masumoto, T., IEEE Trans. Magn. 33, 3793, (1997).Google Scholar
5. Yoshizawa, Y., Oguma, S., and Yamauchi, K., J. Appl. Phys. 64, 6044, (1988).Google Scholar
6. Willard, M. A., Laughlin, D. E., McHenry, M. E., Thoma, D., Sickafus, K., Cross, J. and Harris, V., J. Appl. Phys. 84, 67736777, (1998).Google Scholar
7. Porter, D.A. and Easterling, K.E., Phase Transformations in Metals and Alloys, 2nd ed. (Chapman & Hall, London, 1992), 78.Google Scholar
8. Meisel, L.V., Cote, P.J., Acta metall. 31(7), 10531059, 1983.Google Scholar