Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-24T21:30:19.777Z Has data issue: false hasContentIssue false
  • English
  • Français

A Conceivable Technique of Measuring Sorption Coefficients in Intact Rock Using an Electrical Potential Gradient as the Driving Force for Migration

Published online by Cambridge University Press:  01 February 2011

Martin Löfgren  and
Ivars Neretnieks
Martin Löfgren
Affiliation:
Chemical Engineering and Technology, Royal Institute of Technology, Teknikringen 26, 100 44 Stockholm, Sweden
Ivars Neretnieks
Affiliation:
Chemical Engineering and Technology, Royal Institute of Technology, Teknikringen 26, 100 44 Stockholm, Sweden
Get access

Abstract

Sorption coefficients are traditionally obtained in batch experiments if the sorbent is strongly or intermediately sorbing. In a batch experiment the rock is crushed and this could increase the surface area as well as induce new and fresh surfaces. Therefore there is some concern whether sorption coefficients obtained in batch experiments represents those of intact rock. Performing sorption experiment by diffusion in intact rock with intermediately and strongly sorbing species seems impossible in practice due to extremely long experimental times. In this paper the possibility of increasing the migration rate in the rock by two of three orders, thus enabling KD measurements of intermediately sorbing species in intact rock, is discussed. The increase in migration ratehas already been achieved successfully in so called through electromigration experiments using non-sorbing species. Here a potential gradient acts as the main driving force. In our experiments the migration rate was increased 320 times by using a potential drop of only 9 volts.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 807: Symposium Scientific Basis for Nuclear Waste Management XXVII , 2003 , 683
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Skagius, K., Svedberg, G., Neretnieks, I., Nuclear Technology Vol. 59 (2). pp. 302–313. (1982)Google Scholar
2. Byegård, J., Johansson, H., Skålberg, M., SKB Technical report, TR 98–18 (1998)Google Scholar
3. Skagius, K., Neretnieks, I., Measurements of cesium and strontium diffusion in biotite gneiss. Water Resources Research Vol. 24 (1). pp. 75–84. (1988)Google Scholar
4. Ohlsson, Y., Studies of Ionic Diffusion in Crystalline Rock, Doctoral thesis at the Royal Institute of Technology, Stockholm, Sweden. ISBN 91–7283–025–5. (2000)Google Scholar
5. Löfgren, M. and Neretieks, I., J of Contaminant Hydrology Vol. 61. pp. 107–115. (2003)Google Scholar
6. Löfgren, M. and Neretieks, I., Formation factor measurements in granite in the laboratory -Comparison of through diffusion and electromigration techniques. Presented at the MRS 2002 Fall meeting, Boston, USA. (2002)Google Scholar
7. Maes, N., Moors, H., Dierckx, A., De Cannière, P. and Put, M., J. of Contaminant Hydrology Vol. 36. pp. 231–247. (1999)Google Scholar
8. Atkins, P.W., Physical Chemistry 6th Ed. Oxford University Press (1999)Google Scholar
9. Neretnieks, I., J. of Geophysical Research Vol. 85. pp. 4379–4397 (1980)Google Scholar