Hostname: page-component-669899f699-b58lm Total loading time: 0 Render date: 2025-05-02T11:00:50.840Z Has data issue: false hasContentIssue false
  • English
  • Français

The Composition Of Polymer Composite Fracture Surfaces As Studied By Xps

Published online by Cambridge University Press:  15 February 2011

Donald A. Wiegand  and
James J. Pinto
Donald A. Wiegand
Affiliation:
ARDEC, Picatinny Arsenal, NJ
James J. Pinto
Affiliation:
ARDEC, Picatinny Arsenal, NJ
Get access

Abstract

The composition of the fracture surfaces of a composite made up of a polycrystalline organic nonpolymeric filler and a binder composed of a copolymer was studied by XPS. Because the binder and the filler of the composite each have at least one element not in common it is possible to easily distinguish between the binder and filler by XPS. A measure of the relative amounts of binder and filler on the fracture surfaces, therefore, could be made as a function of the sample temperature, T, and the strain rate during fracture. The ratio of filler to binder, F/B, increases with decreasing T at constant strain rate and is least sensitive to strain rate at T's below TG, the quasi static glass transition T. At higher T, F/B increases with strain rate at constant T. These results indicate that as the binder becomes stronger and stiffer due to a decrease in T or an increase in strain rate more of the fracture processes take place in the filler whose properties are expected to be less sensitive to T and strain rate. These results are related to the fracture properties as observed by uniaxial compression.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 409: Symposium Q – Fracture-Instablility Dynamics, scaling and Ductile/Brittle Behavior , 1995 , 281
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Wiegand, D. A., Hu, C., Rupel, A. and Pinto, J., 9th International Conference on Deformation, Yield and Fracture of Polymers (Churchill College, Cambridge, U.K.), The Institute of Materials, London (1994) p 64.Google Scholar
2. Wiegand, D. A., 3rd International Conference on Deformation and Fracture of Composites, University of Surrey, Guildford, U.K. (1995) p558.Google Scholar
3. Wiegand, D. A., Pinto, J. and Nicolaides, S., J. Energetic Materials 9, 19 (1991).Google Scholar
4. Ikeo, N. et al, Handbook of X-ray Photoelectron Spectroscopy, JEOL Ltd, Akishima, Tokyo, Japan (1991) p 12.Google Scholar
5. Reilman, R. F., Msezane, A. and Manson, S. T., J. Electron Spectroscopy and Related Phenomena 8, 389 (1976).Google Scholar
6. Dobratz, B. M. and Crawford, P. C., LLNL Explosive Handbook, Properties of Explosives and Explosive Simulants, UCRL 52297 Change 2, p 6–6 (1985).Google Scholar
7. Dobratz, B. M. and Crawford, P. C., p6–8.Google Scholar