Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-24T16:39:38.454Z Has data issue: false hasContentIssue false
  • English
  • Français

Comparison of temperature driven ordering in bulk foil and thin film of L10 ordered FePd

Published online by Cambridge University Press:  26 February 2011

Chaisak Issro ,
Wolfgang Püschl ,
Wolfgang Pfeiler ,
Bogdan Sepiol ,
Peter F. Rogl ,
William A. Soffa ,
Manuel Acosta  and
Véronique Pierron-Bohnes
Chaisak Issro
Affiliation:
Institut für Materialphysik, University of Vienna, Strudlhofgasse 4, A-1090 Vienna, Austria
Wolfgang Püschl
Affiliation:
Institut für Materialphysik, University of Vienna, Strudlhofgasse 4, A-1090 Vienna, Austria
Wolfgang Pfeiler
Affiliation:
Institut für Materialphysik, University of Vienna, Strudlhofgasse 4, A-1090 Vienna, Austria
Bogdan Sepiol
Affiliation:
Institut für Materialphysik, University of Vienna, Strudlhofgasse 4, A-1090 Vienna, Austria
Peter F. Rogl
Affiliation:
Institut für Physikalische Chemie, University of Vienna, Währingerstraβe 42, A-1090 Vienna, Austria
William A. Soffa
Affiliation:
Dept. of Material Science and Engineering, University of Pittsburgh, 842 Benedum Hall, Pittsburgh, PA 15261, U.S.A.
Manuel Acosta
Affiliation:
IPCMS-GEMME, CNRS-ULP, 23 rue du Loess, BP 43, F-67034 Strasbourg Cedex 2, France
Véronique Pierron-Bohnes
Affiliation:
IPCMS-GEMME, CNRS-ULP, 23 rue du Loess, BP 43, F-67034 Strasbourg Cedex 2, France
Get access

Abstract

Changes in the degree of long-range order of 10 μm thick FePd foil are presented and compared with results on 50 nm thick FePd films. The films were produced by dc and rf magnetron co-sputtering on Si as well as by molecular beam epitaxy co-deposition on MgO substrates. Long-range order was studied by electrical resistivity measurement, X-ray diffraction and Möβbauer spectroscopy.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 842: Symposium S – Integrative and Interdisciplinary Aspects of Intermetallics , 2004 , S3.10
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Kulovits, A., Püschl, W., Soffa, W.A., and Pfeiler, W., Mat. Res. Soc. Symp. Proc. 753, BB5.37 (2003).Google Scholar
2. Issro, Ch., Püschl, W., Pfeiler, W., Rogl, P.F., Soffa, W.A., Acosta, M., Schmerber, G., Kozubski, R. and Pierron-Bohnes, V., Scripta Mat., in the press.Google Scholar
3. Rossiter, P.L., The electrical resistivity of metals and alloys. Cambridge: University Press (1987), p. 165.Google Scholar
4. Kulovits, A., Wiezorek, J.M.K., Soffa, W.A., Püschl, W. and Pfeiler, W., J. Alloys Compounds, 378, 285 (2004).Google Scholar
5. Lang, H., Pfeiler, W. and Mohri, T., Intermetallics 7, 1373 (1999).Google Scholar
6. Lang, H., Uzawa, H., Mohri, T. and Pfeiler, W., Intermetallics 9, 9 (2001).Google Scholar
7. Rancourt, D.G. and Ping, J.Y., Nucl. Instr. and Meth. B 58, 85 (1991).Google Scholar
8. Tsurin, V.A., Yurchikov, E.E., and Men'shikov, A.Z., Sov. Phys. Solid State 17, 1942 (1976).Google Scholar
9. Xu, H., Heinrich, H. and Wieczorek, J.M.K., Intermetallics 11, 963 (2003).Google Scholar