No CrossRef data available.
Article contents
Comparison of Lasing Characteristics of GaInNAs Quantum Dot Lasers and GaInNAs Quantum Well Lasers
Published online by Cambridge University Press: 01 February 2011
Abstract
Self-assembled GaInNAs/GaAsN single layer quantum dot (QD) lasers grown using solid source molecular beam epitaxy have been fabricated and characterized. Temperature-dependent measurements have been carried out on the GaInNAs QD lasers. High-temperature operation up to 65°C was demonstrated from an unbonded GaInNAs QD laser (50 × 1060 μm2), with high characteristic temperature (T0) of 79.4 K in the temperature range of 10-60°C. For comparison, temperature-dependent operation has also been studied on the GaInNAs single quantum well (SQW) lasers. Unlike the relation between the cavity length and T0 in GaInNAs SQW lasers, longer-cavity GaInNAs QD laser (50 × 1700 μm2) showed lower T0 of 65.1 K, which is presumably believed due to the nonuniformity of the GaInNAs QD layer.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2006