Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-28T13:11:57.240Z Has data issue: false hasContentIssue false
  • English
  • Français

Characterization of SiC Materials and Devices by SIMS

Published online by Cambridge University Press:  01 February 2011

Yupu Li  and
Yumin Gao
Yupu Li
Affiliation:
[email protected], Applied Microanalysis Labs, SIMS Labs, 2990 Scott Boulevard, Santa Clara, CA, 95054, United States, 408-844-9625 Ext. 601, 408-844-9627
Yumin Gao
Affiliation:
[email protected], Applied Microanalysis Labs, 2990 Scott Boulevard, Santa Clara, CA, 95054, United States
Get access

Abstract

Based on the various implanted standards, we have used SIMS (Secondary Ion Mass Spectrometry) to characterize SiC materials and devices. We develop the SIMS analysis on 2'' and 3'' full SiC wafers using our customized sample load chamber at a Cameca 4f magnetic sector SIMS tool. This feature is particularly useful for the on-line control of the wafer processing. With our special mounting skills, we provide SIMS analyses on small patterned area (say 50 microns × 50 microns or larger) of the tiny or large SiC dies. The detailed comparison between the implanted profiles for the major dopants (such as B, Al, and N) measured by SIMS and the simulated profiles by SRIM code [1] will be discussed. The detection limits for selected elements will also be discussed. In addition, it is well know that nitrogen has a very high ionization potential and zero electronic affinity. Therefore, nitrogen is normally profiled with a Cs+ primary beam and monitored negative molecular ions of (matrix+N)- [such as (Al+N)- in Al [2], (Si+N)- in Si, and (C+N)- in SiC]. However, such negative molecular detection mode cannot be applied to the multi-layers with different matrix elements (such as Al/SiC and Cu/SiC samples). Fortunately, like to detect nitrogen in Cu [3], we have found that using a Cs+ primary ion beam and monitoring (Cs2N)+ molecular ions by Cameca magnetic sector SIMS tools, nitrogen in the multi-layer samples including SiC layer can be detected by the (Cs2N)+ detection model [3,4] with a very low profiling energy (such as 2.5keV).

Keywords

secondary ion mass spectroscopy (SIMS)semiconductingdopant
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 911: Symposium B – Silicon Carbide 2006 – Materials, Processing and Devices , 2006 , 0911-B05-20
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 SRIM 2003 computer program, based on Ziegler, J.F., Biersack, J.P., and Littmark, U., The Stopping and Ranges of Ions in Solids (Pergamon, New York, 1985).Google Scholar
2 Li, Yupu, Shyue, J., J, Hunter, McComb, B., Chun, M., Doherty, R., and Foad, M., Proc. of the 14th International Conference on Ion Implantation Technology (Sept. 22-27, 2002, Taos, NM, USA), IEEE Proc. 02EX505, pages 625–628.Google Scholar
3 Li, Yupu, Applied Surface Sciences, 231–232, 796 (2004).Google Scholar
4 Gao, Yumin, Surface And Interface Analysis, 14, 552 (1989).Google Scholar
5 See, for example, Neudeck, P.G., paper entitled Recent Progress in Silicon Carbide Semiconductor Electronics Technology, 1995, NASA Lewis SiC Home Page.Google Scholar
6 See, for example, Zolper, J.C. and Skowronski, M., Guest Editors, April 2005 issue of MRS Bulletin, Advances in Silicon Carbide Electronics and other contribution papers, Pittsburgh, PA.Google Scholar
7 Kudriavtsev, Y., Viullegas, A., Godines, A., Asomza, R., and Usov, I., “Quantitave SIMS Analysis of SiC”, Surface and Interface Analysis 35, 491 (2003).Google Scholar
8 Benninghoven, A., Rudenauer, G.G., and Werner, H.W., Secondary Ion Mass Spectrometry: Basic Concepts, Instrumental Aspects, Applications and Trends, John Wiley & Sons, 1987.Google Scholar
9 Wilson, R.G., Stevie, F.A., and Magee, C.W., Secondary Ion Mass Spectrometry: A practical Handbook for Depth Profiling and Bulk Impurity Analysis, John Wiley & Sons, 1989.Google Scholar
10 Lin, C., Li, Yupu, Chater, R.J., Li, J., Nejim, A., Zhang, J.P., and Hemment, P.L., Nuclear Instruments and Methods in Physics Research B80/81, 323 (1993).Google Scholar