Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-07T23:16:08.709Z Has data issue: false hasContentIssue false
  • English
  • Français

Characteristics of a-Si:H Schottky Photodiode by Using Mo Barrier Metal at Al/ITO Contact

Published online by Cambridge University Press:  21 February 2011

Yoshihiko Sakai ,
Hiroyuki Hotta ,
Tsutomu Hamada ,
Hisao Ito  and
Takashi Ozawa
Yoshihiko Sakai
Affiliation:
Electronic Imaging & Devices Research Laboratory, FUJI XEROX Co., Ltd. 2274 Hongo, Ebina-shi, Kanagawa 243–04, JAPAN
Hiroyuki Hotta
Affiliation:
Electronic Imaging & Devices Research Laboratory, FUJI XEROX Co., Ltd. 2274 Hongo, Ebina-shi, Kanagawa 243–04, JAPAN
Tsutomu Hamada
Affiliation:
Electronic Imaging & Devices Research Laboratory, FUJI XEROX Co., Ltd. 2274 Hongo, Ebina-shi, Kanagawa 243–04, JAPAN
Hisao Ito
Affiliation:
Electronic Imaging & Devices Research Laboratory, FUJI XEROX Co., Ltd. 2274 Hongo, Ebina-shi, Kanagawa 243–04, JAPAN
Takashi Ozawa
Affiliation:
Electronic Imaging & Devices Research Laboratory, FUJI XEROX Co., Ltd. 2274 Hongo, Ebina-shi, Kanagawa 243–04, JAPAN
Get access

Abstract

An ITO/a-Si:H Schottky Photodiode(PD) with Mo as a barrier metal at Al/ITO contact has been made and it shows its useful characteristics. The PD without Mo had high dark current proportional to the contact-via-hole area and quite a large resistance at the contact area. The XPS analysis of the Al/ITO interface indicated that Al and O in ITO mutually diffused around the interface, resulting in the degradation of ITO/a-Si:H Schottky barrier. Most of the diffused Al formed aluminum oxide (AI2O3) at the Al/ITO interface, and which caused high resistance of the contact area.

Inserting Mo barrier metal 500Å thick, the dark current got less dependent on the contact area and decreased by 2/3 on 254×227 μm PD with 106×106//m contact-via-hole. The contact resistance also decreased significantly to 1/105 of those of the conventional ones. From the XPS analysis of interface, it was also found that Mo barrier metal prevented Al diffusion into the ITO and formation of aluminum oxide at the interface.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 219: Symposium A – Amorphous Silicon Technology - 1991 , 1991 , 197
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ozawa, T., Takenouchi, M., Hamano, T., Ito, H., Fuse, M. and Nakamura, T., Proc. Int. Microelectron. Conf. 1323 (1982)Google Scholar
2. Hamano, T., Ito, H. Nakamura, T., Ozawa, T., Fuse, M. and Takenouchi, M.., Jpn. J. Appl. Phys. 21(Suppl 21–1), 251 (1982)CrossRefGoogle Scholar
3. Kaneko, S., Okumura, F., Sakamoto, M., Uchida, H. and Kajihara, Y., Int. Soc. for Optical Engineering 617 127 (1986)Google Scholar
4. Saika, T., Kaifu, N., Gofuku, I., Hatanaka, K., Chihashi, K. and Komatsu, T., Extended Abstracts of 19th Conf. on SSDM 509 (1987)Google Scholar
5. Ito, H. Nishihara, Y., Nobue, M., Fuse, M., Nakamura, T., Ozawa, T., Tomiyama, S., Weisfield, R., Tuan, H. and Thompson, M., IEDM Dig. Tech. Pap. 436 (1985)Google Scholar
6. Ito, H. Suzuki, T., Nobue, M., Nishihara, Y., Sakai, Y., Ozawa, T. and Tomiyama, S., in Amorphous Silicon Semiconductors - Pure and Hydroqenated, edited by Madan, A., Thompson, M., Adler, D. and Hamakawa, Y. (Mater. Res. Soc. Proc. 95, Anaheim, CA 1987) pp. 436.Google Scholar
7. Miyake, H., Sakai, K., Abe, T., Sakai, Y., Hotta, H., Ito, H. and Ozawa, T., Jpn. J. Appl. Phys. 29(12), L2374 (1990)Google Scholar
8. McMahon, T.J., Yacobi, B.G., Sadlon, K., Dick, J. and Madan, A., J. Non-Cryst Solid 66 (1/2), 375 (1984)Google Scholar
9. Seki, K., Yamamoto, H, Sasano, A. and Tsukada, T., J. Non-Cryst Solid 59/60(2), 1179 (1983)Google Scholar
10. Sakai, Y., Yamada, T., Ito, H. and Ozawa, T., Extended Abstracts of 49th Autumn Meet. 1988 of Jpn. Soc. Appl. Phys. (1) 362 (1988) in JapaneseGoogle Scholar
11. Inoue, F., Ando, K., Kabuto, N., Kamiya, M., Nashimoto, R., Suzuki, K., Suzuki, H., Tsukada, T., Kawakami, H. and Nakatani, M., SID Int. Symp. Dig. Tech. Pap. 265 (1988)Google Scholar