Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-24T17:36:00.519Z Has data issue: false hasContentIssue false
  • English
  • Français

Ba substituted Pb(ZrxTi1-x)O3 thin films grown by MOCVD

Published online by Cambridge University Press:  26 February 2011

Jochen Puchalla ,
Susanne Hoffmann-Eifert ,
Lorena Cattaneo ,
Sergio Carella  and
Rainer Waser
Jochen Puchalla
Affiliation:
[email protected], Forschungszentrum Juelich, IFF/IEM and CNI, Germany
Susanne Hoffmann-Eifert
Affiliation:
[email protected], Forschungszentrum Juelich, IFF/IEM, Leo-Brandt-Str., Juelich, N/A, 52425, Germany, 02461 616505, 02461 612550
Lorena Cattaneo
Affiliation:
[email protected], SAES Getters S.p.A., Italy
Sergio Carella
Affiliation:
[email protected], SAES Getters S.p.A., Italy
Rainer Waser
Affiliation:
[email protected], Forschungszentrum Juelich, IFF/IEM and CNI, Germany
Get access

Abstract

High quality Pb(Zr,Ti)O3 [PZT] and (Pb1-xBax)(ZryTi1-y)O3 (x ≤ 0.15, 0.25 ≤ y ≤ 0.50) [PBZT] thin films were grown on Pt (111) and Ir (111) coated silicon substrates by means of a pulsed liquid injection metal organic chemical vapor deposition (MOCVD) technique. The precursor solutions of Pb(DPM)2, Ba(DPM)2, Zr(IBPM)4, and Ti(OiPr)2(DPM)2 dissolved in butylacetate were separately injected into an AIX-200 reactor using a TriJet™ vaporizer. Stoichiometric films (0.98 ≤ A/B ≤ 1.06) with thickness between 80 nm and 150 nm were deposited at a susceptor temperature of 615 °C to 660 °C. Pure PZT films grown on platinum coated substrates show a randomly oriented perovskite structure accompanied with formation of a PbPtx alloy at the PZT/Pt interface. On the Ir(111) coated substrates the pure PZT films also exhibit a random orientation possibly due to oxidation of the Ir surface layer during the deposition process. Ferroelectric properties of Pr = 35 µC/cm2 and Ec = 90 kV/cm were obtained for a PZT (30/70) film of 150 nm thickness grown on Ir/Si. In contrast, PBZT films with a Ba content of about 5 to 15% show lower tendency for formation of a PbPtx interfacial layer, and a preferred (111) texture was observed for PBZT films grown on the Ir (111) substrates under optimized process conditions. Tetragonal and rhombohedral PBZT films with 15% Ba and a Zr-content of about 0.35 and 0.50, respectively, show an orientation dependence of the ferroelectric properties in the way that Ec is highest for <111> textured films in comparison to Ec determined for <110> textured films. The remanent polarization of 85 nm thick tetragonal PBZT films changes from 17 µC/cm2 for <111> orientation to 13.5 µC/cm2 for <110> texture. The relative permittivity changes in the same way from 600 to 540, respectively. The rhombohedral films exhibit a nearly independent Pr value of about 11 µC/cm2 while the switching field changes from 75 kV/cm for an <111> textured film to 46 kV/cm for an (110) textured one. The relative permittivity values of both films are 890 and 715 for the (110) and the (111) textured films, respectively. The trends observed for the textured PBZT films grown on Si substrates reflect the behaviour reported for epitaxial films [2]

Keywords

ferroelectricfilmchemical vapor deposition (CVD) (deposition)
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 902: Symposium T – Ferroelectric Thin Films XIII , 2005 , 0902-T04-06
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 17th International Symposium on Integrated Ferroelectrics (ISIF2005); http://www.isif.net; especially see 2-1I by Park, Youngsoo, Samsung Adv. Inst. of Technology, and 9-1I by Hiroshi Funakubo, Tokyo Inst. of Technology Google Scholar
2 Oikawa, T., Aratani, M., Funakubo, H., Saito, K., Mizuhira, M., J. Appl. Phys., 95, 3111 (2004).Google Scholar
3 Lee, June Key, Lee, Moon-Sook, Hong, Sungho, Lee, Wanin, Lee, Yong Kyun, Shin, Sangmin, Park, Youngsoo, Jpn. J. Appl. Phys., 41, 6690 (2002).Google Scholar
4 Jaffe, B., Cook, W. R., Jaffe, H., Piezoelectric Ceramics, Academic Press Inc. (London) Ltd., London (1971); chapter 7.3.Google Scholar
5 Precursors are supplied by: SAES Getters S.p.A., 20020-Lainate (Milano), Italy.Google Scholar
6 Ganster, R., Hoffmann-Eifert, S., Waser, R., Integrated Ferroelectrics 55, 795 (2003).Google Scholar
7 Hoffmann-Eifert, S., Puchalla, J., Cattaneo, L., Carella, S., Waser, R., p. 982–989 in Devi, A., Fischer, R., Parala, H., Allendorf, M., Hitchman, M. (Eds.), Electrochemical Society Proceedings Vol. 2005–09 (2005).Google Scholar
8 Braeuhaus, D., IWE-II, RWTH Aachen University, private communication.Google Scholar
9 Roeder, J. F., Baum, T. H., Bilodeau, S. M., Stauf, G. T., Ragaglia, C., Russell, M. W., Van Buskirk, P. C., Adv. Mater. Opt. Electron., 10, 145 (2000).Google Scholar
10 Foster, C.M., Bai, G.R., Csencsits, R., Vetrone, J., Jammy, R., Wills, L.A., Carr, E., Amano, Jun, J. Appl. Phys. 81, 2349–2357 (1997).Google Scholar
11 Pertsev, N.A., Kukhar, V. G., Kohlstedt, H., Waser, R., Phys. Rev. B 67, 54107 (2003).Google Scholar