Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-03T08:25:55.537Z Has data issue: false hasContentIssue false

A-Si:H Thin Film Transistors and Logic Circuits Fabricated in an Integrated Multichamber System

Published online by Cambridge University Press:  25 February 2011

S. S. Kim
Affiliation:
North Carolina State University, Dept. of Physics, Raleigh, NC 27695, U.S.A.
C. Wang
Affiliation:
North Carolina State University, Dept. of Physics, Raleigh, NC 27695, U.S.A.
G. Lucovsky
Affiliation:
North Carolina State University, Dept. of Physics, Raleigh, NC 27695, U.S.A.
Get access

Abstract

Hydrogenated amorphous silicon (a-Si:H) thin-film-transistors (TFT’s) and logic circuits have been fabricated using a simple 3-mask process. Inverted staggered TFT structures were prepared in a multichamber UHV-compatible system that provides: 1) sequential deposition of dielectrics, and intrinsic and doped a-Si:H by remote plasma-enhanced chemical-vapor deposition (Remote PECVD) in a single deposition chamber; 2) in-situ surface analysis by Auger Electron Spectroscopy (AES); and 3) dry etching of deposited thin films by Remote plasma-enhanced etching, Remote PEE. A field-effect electron mobility of 0.74 cm2/V-s, and a threshold voltage of 2.5 Volts have been measured at room temperature in the TFTs. The on/off current ratio of the TFT exceeds 106. The a-Si:H TFT logic circuits, 2-transistor inverters and addressable 6-transistor static memory cells, operate at a supply voltage of as low as 8 Volts. The experimental results indicate that high performance a-Si:H thin film devices can be fabricated by sequential Remote plasma processing in a multichamber integrated system.

Type
Research Article
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

LeComber, P.G., J. Non-Cryst. Solids 115, 1 (1989).Google Scholar
Oana, Yasuhisa J. Non- Cryst. Solids 115, 27 (1989).Google Scholar
3. Steemers, H., Hack, M., Tuan, H., Hull, V. J., Rommelmann, H., Stephany, J., and Lakatos, A., J. Non- Cryst. Solids 115, 36 (1989).Google Scholar
4. Nishihara, Y., Nobue, M., Abe, T., Miyake, H., Ito, H., Ozawa, T., and Hamano, T., J. Non-Cryst. Solids 115, 183 (1989).Google Scholar
5. Parsons, G.N., Kim, S.S., Lucovsky, G., MRS Symp. Proc. 149, 265 (1989).Google Scholar
6. Kim, S.S., Parsons, G.N., Fountain, G.G., and Lucovsky, G., J. Non-Cryst. Solids 115, 69 (1989)Google Scholar
7. Parsons, G.N., Tsu, D.V., and Lucovsky, G., J. Vac. Sci. Technol. A5, 2231 (1987).Google Scholar
8. Lucovsky, G., Tsu, D.V., Kim, S.S., Markunas, R.J., and Fountain, G.G., Appl. Surf. Sci. 39, 33 (1989).Google Scholar
9. Lucovsky, G., Kim, S.S., Tsu, D.V., Parsons, G.N., and Fitch, J.T., J. Vac. Sci. Technol. A8, (1990), in press.Google Scholar
10. Kim, S.S., Tsu, D.V., and Lucovsky, G., J. Vac. Sci. Technol. A6, 1740 (1988).Google Scholar
11. Parsons, G.N., Wang, C., Kim, S.S., and Lucovsky, G., MRS Symp. Proc. 192, (1990), in press.Google Scholar
12. Wang, C., Parsons, G.N., Kim, S.S., Buehler, E.C., Nemanich, R.J., and Lucovsky, G., MRS Symp. Proc. 192, (1990), in press.Google Scholar