Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-28T05:30:03.976Z Has data issue: false hasContentIssue false
  • English
  • Français

Application of Cathodic Arc Deposited Amorphous Hard Carbon Films to the Head/Disk Tribology

Published online by Cambridge University Press:  10 February 2011

Simone Anders ,
C. Singh Bhatia ,
Walton Fong ,
Roger Yu Lo  and
David B. Bogy
Simone Anders
Affiliation:
Lawrence Berkeley National Laboratory, I Cyclotron Road, Berkeley, CA 94720, [email protected]
C. Singh Bhatia
Affiliation:
SSD/IBM, 5600 Cottle Road, San Jose, CA 95193
Walton Fong
Affiliation:
Computer Mechanics Laboratory, Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA 94720
Roger Yu Lo
Affiliation:
Computer Mechanics Laboratory, Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA 94720
David B. Bogy
Affiliation:
Computer Mechanics Laboratory, Department of Mechanical Engineering, University of California at Berkeley, Berkeley, CA 94720
Get access

Abstract

Amorphous hard carbon films deposited by filtered cathodic arc deposition exhibit very high hardness and elastic modulus, high mass density, low coefficient of friction, and the films are very smooth. All these properties are beneficial to applications of these films for the head/disk interface tribology. The properties of cathodic arc deposited amorphous carbon films are summarized, and they are compared to sputter deposited, hydrogenated (CHx), and nitrogenated (CNx) carbon films which are the present choice for hard disk and slider coatings. New developments in cathodic arc coaters are discussed which are of interest to the disk drive industry. Experiments on the nanotribology, mass density and hardness, corrosion behavior, and tribochemical behavior of cathodic arc films are reported. A number of applications of cathodic arc deposited films to hard disk and slider coatings are described. It is shown that their tribological performance is considerably better compared to CHx and CNx films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 517: Symposium F – Wide Bandgap Semiconductors for High Power, High Frequency , January 1998 , 371
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Koskinen, J., J. Appl. Phys. 63, pp. 2094–2097 (1988).10.1063/1.341115Google Scholar
2. Friedmann, T. A., Sullivan, J. P., Knapp, J. A., Tallant, D. R., Follstaedt, D. M., Medlin, D. L., and Mirkarimi, P. B., Appl. Phys. Lett. 71, pp. 3820–3822 (1997).Google Scholar
3. Weiler, M., Sattel, S., Giessen, T., Jung, K., Ehrhardt, H., Veerasamy, V. S., and Robertson, J., Phys. Rev. B 53, pp. 1594–1608 (1996).10.1103/PhysRevB.53.1594Google Scholar
4. Boxman, R. L., Martin, P. J., and Sanders, D. M., Editors, Handbook of Vacuum Arc Science and Technology. Noyes Publications, Park Ridge, 1995.Google Scholar
5. Cuomo, J. J., Pappas, D. L., Bruley, J., Doyle, J. P., and Saenger, K. L., K. L., J. Appl. Phys. 70, pp. 1706–1711 (1991).Google Scholar
6. Fallon, P. J., Veerasamy, V. S., Davis, C. A., Robertson, J., Amaratunga, G. A. J., Milne, W. I., and Koskinen, J., Phys. Rev. B 48, pp. 4777–4782 (1993).Google Scholar
7. Pharr, G. M., Callahan, D. L., McAdams, S. D., Tsui, T. Y., Anders, S., Anders, A., Ager, J. W. III, Brown, I. G., Bhatia, C. S., Silva, S. R. P., and Robertson, J., J. Appl. Phys. Lett. 68, pp. 779–781 (1996).10.1063/1.116530Google Scholar
8. Cuomo, J. J., Doyle, J. P., Bruley, J., and Liu, J. C., J. C. J. Vac. Sci. Technol. A 9, pp. 2210–2215 (1991).Google Scholar
9. Coll, B. F., Sathrum, P., Aharonov, R., and Tamor, M. A., Thin Solid Films 209, pp. 165–173 (1992).Google Scholar
10. Lossy, R., Pappas, D. L., Roy, R. A., Cuomo, J. J., and Sura, V. M., Appl. Phys. Lett. 61, pp. 171–171 (1992).Google Scholar
11. Falabella, S. and Sanders, D. M., J. Vac. Sci. Technol. A 10, pp. 394–397 (1992).Google Scholar
12. Aksenov, I. I., Vakula, S. I., Padalka, V. G., Strel'nitskii, V. E., and Khoroshikh, V. M., Sov. Phys. Tech. Phys. 25, pp. 1164–1166 (1980).Google Scholar
13. Anders, S., Anders, A., Dickinson, M. R., MacGill, R. A., and Brown, I. G., IEEE Trans. Plasma Sci. 25, pp. 670–674 (1997).10.1109/27.640683Google Scholar
14. Anders, S., Anders, A., Ager, J. W. III, Wan, Z., Pharr, G. M., Tsui, T. Y., Brown, I. G., and Bhatia, C. S., Mat Res. Soc. Proc. 383, pp. 453–458 (1995).Google Scholar
15. Monteiro, O.R., Delplancke-Ogletree, M.-P., Lo, R. Y., Winand, R., and Brown, I. G., Surf. Coat. Technol. 94/95, pp. 220–225 (1997).Google Scholar
16. Gupta, B. K. and Bhushan, B., Thin Solid Films 270, pp. 391–398 (1995).10.1016/0040-6090(95)06699-3Google Scholar
17. Scheibe, H.-J. and Schultrich, B., Thin Solid Films 246, pp. 92–102 (1994).10.1016/0040-6090(94)90737-4Google Scholar
18. Cho, N.-H., Krishnan, K. M., Veirs, D. K., Rubin, M. D., Hopper, C. B., Bhushan, B., and Bogy, D. B., J. Mater. Res. 5, pp. 2543–2554 (1990).Google Scholar
19. Cutiongco, E. C., Li, D., Chung, Y.-W., and Bhatia, C. S., J. Tribology 118, pp. 543–548 (1996).Google Scholar
20. Bhushan, B., Kellock, A. J., Cho, N.-H., and Ager, J. W. III, J. Mater. Res. 7, pp. 404–410 (1992).Google Scholar
21. Wang, Y., Chen, H., Hoffman, R. W., and Angus, J. C., J. Mater. Res. 5, pp. 2378–23-86 (1990).Google Scholar
22. Puretzky, A. A., Geohegan, D. B., Jellison, G. E., and McGibbon, M. M., Appl. Surf. Sci. 96–98, pp. 859–865 (1996).10.1016/0169-4332(95)00567-6Google Scholar
23. Pappas, D. L., Saenger, K. L., Cuomo, J. J., and Dreyfus, R. W., J. Appl. Phys. 72, pp. 3966–3970.10.1063/1.352249Google Scholar
24. Lifshitz, Y., Lempert, G. D., Grossman, E., Avigal, I., Uzan-Saguy, C., Kalish, R., Kulik, J., Marton, D., and Rablais, J. W., Diamond Relat. Mater. 4, pp. 318–323 (1995).Google Scholar
25. Rossi, F., Andre, B., van Veen, A., Mijnarends, P. E., Schut, H., Labohm, F., Dunlup, H., Delplancke, M.-P., and Hubbard, K., J. Mater. Res. 9, pp. 2440–2449 (1994).10.1557/JMR.1994.2440Google Scholar
26. Francheschini, D. F., Achete, C. A., and Freire, F. L. Jr, Appl. Phys. Lett. 60, pp. 3229–3231 (1992).Google Scholar
27. Gupta, B. K. and Bhushan, B., B., Thin Solid Films 270, pp. 391–398 (1995).10.1016/0040-6090(95)06699-3Google Scholar
28. Tsui, T. Y., Pharr, G. M., Oliver, W. C., Bhatia, C. S., White, R. L., Anders, S., Anders, A., and Brown, I. G., Mat. Res. Soc. Symp. Proc. 383, pp. 447–452 (1995).Google Scholar
29. Schneider, D., Schwarz, T., and Schultrich, B., Thin Solid Films 219, pp. 92–102 (1992).Google Scholar
30. Schneider, D., Scheibe, H.-J., Schwarz, Th., and Hess, P., Diamond Relat. Mater. 2, pp. 1396–1401 (1993).Google Scholar
31. Schultrich, B., Scheibe, H.-J., Grandremy, G., Schneider, D., D., and Siemroth, P., Thin Solid Films 253, pp. 125–129 (1994).Google Scholar
32. Anders, S., Anders, A., Bhatia, C. S., Raoux, S., Schneider, D., Ager, J. W. III and Brown, I. G., Proc. Applications of Diamond Films and Related Materials: Third Int. Conf., NIST Special Publication 885, pp. 809–812 (1995).Google Scholar
33. Anders, S., Anders, A., Brown, I. G., Wei, B., Komvopoulos, K., Ager, J. W. II, and Yu, K. M., Surf. Coat. Technol. 68/69, pp. 388–393 (1994).Google Scholar
34. Yun, X. H., Bogy, D. B., Bhatia, C. S., IEEE Transaction on Magnetics 32 (1996) pp. 3669 (1996).Google Scholar
35. Kasai, P. H., Tang, W. T., and Wheeler, P., Appl. Surf. Sci. 51, pp. 201 (1991).10.1016/0169-4332(91)90403-7Google Scholar
36. Bhatia, C. S., Anders, S., Bobb, K., Hsiao, R., Bogy, D. B., and Brown, I. G., Tribology, J., to be published.Google Scholar
37. Anders, S., Bhatia, C. S., Bogy, D. B., and Brown, I. G., Data Storage, pp. 31–38 (1997).Google Scholar