Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-12-01T00:24:24.740Z Has data issue: false hasContentIssue false

Textured substrate based organic solar cell for higher absorption and improved performance

Published online by Cambridge University Press:  31 January 2011

Kanwar Singh Nalwa
Affiliation:
[email protected], Iowa State University, Department of Electrical and Computer Engineering, Ames, Iowa, United States
Joong Mok Park
Affiliation:
[email protected], Iowa State University, Ames Laboratory-USDOE & Department of Physics and Astronomy, Ames, United States
Wai Leung
Affiliation:
[email protected], Iowa State University, Microelectronics Research Center, Ames, United States
Kristen Constant
Affiliation:
[email protected], Iowa State University, Department of Materials Science and Engineering, Ames, United States
Kai Ming Ho
Affiliation:
[email protected], Iowa State University, Ames Laboratory-USDOE & Department of Physics and Astronomy, Ames, United States
Sumit Chaudhary
Affiliation:
[email protected], Iowa State University, Department of Electrical and Computer Engineering, Ames, Iowa, United States
Get access

Abstract

The performance of polymer-based photovoltaic devices is limited by several factors like high band-gap and low charge-carrier mobility, to name a few. Thicker active-layers have high optical absorption but the transport of carriers in them is inefficient. Thus the optimal thickness of the active-layers has to be determined carefully. This conflict can be resolved using a three-dimensional (3D) microscale textured grating shaped solar cell geometry. The solar cells in this study were fabricated on photoresist gratings to give them 3D texture required for enhanced light absorption. Introduction of texturing has a significant effect on over all power conversion efficiency of the devices. Grating based solar cell having 2 micron pitch showed improved power conversion efficiency over the flat solar cell. In addition to favorable guiding of optical modes, the improvement in efficiency is accomplished by homogenous coverage of the spin-coated active layer, which is a challenging process for non-flat surfaces. Uniform thickness in this study was facilitated by the sufficiently high pitch and low height of the underlying photoresist gratings.

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Tang, C. W. Appl. Phys. Lett. 48, 183 (1986).Google Scholar
2 Peumans, P. Yakimov, A. and Forrest, S. J. Appl. Phys. 93, 3693 (2003).Google Scholar
3 Sariciftci, N. D. Braun, D. Zhang, C. Srdanov, V. I. Heeger, A. J. Stucky, G. and Wudl, F., Appl. Phys. Lett. 62, 585 (1993).Google Scholar
4 Yu, G. and Heeger, A. J. J. Appl. Phys. 78, 4510 (1995).Google Scholar
5 Halls, J. J. M. Walsh, C. A. Greenham, N. C. Marseglia, E. A. Friend, R. H. Moratti, S. C., and Holmes, A. B. Nature 376, 498 (1995).Google Scholar
6 Yu, G. Gao, J. Hummelen, J. C. Wudl, F. and Heeger, A. J. Science 270, 1789 (1995).Google Scholar
7 Ma, W. L. Yang, C. Y. Gong, X. Lee, K. and Heeger, A. J. Adv. Funct. Mater. 15, 1617 (2005)Google Scholar
8 Li, G. Shrotriya, V. Huang, J. Yao, Y. Moriarty, T. Emery, K. and Yang, Y. Nat. Mater. 4, 864 (2005).Google Scholar
9 Chaudhary, S. Lu, H. Müller, A. M., Bardeen, C. J. and Ozkan, M. Nano Lett. 7, 1973 (2007).Google Scholar
10 Kline, R. J. McGehee, M. D. Kadnikova, E. N. Liu, J. and Fréchet, J. M. J., Adv. Mater. (Weinheim, Ger.) 15, 1519 (2003).Google Scholar
11 Campbell, P. and Green, M. A. J. Appl. Phys. 62, 243 (1987).Google Scholar
12 Heine, C. and Morf, R. H. Appl. Opt. 34, 2476 (1995).Google Scholar
13 Sievers, D. W. Shrotriya, V. and Yang, Y. J. Appl. Phys. 100, 114509 (2006).Google Scholar