Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-28T14:20:43.512Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Electrochemical Properties of InVO4 Nanotube Arrays

Published online by Cambridge University Press:  01 February 2011

Ying Wang  and
Guozhong Cao
Ying Wang
Affiliation:
[email protected], University of Washington, Materials Science and Engineering, 5608 15th AVE NE, Apt. 303, Seattle, WA 98105, 98105, United States
Guozhong Cao
Affiliation:
[email protected], University of Washington, Materials Science and Engineering, Seattle, WA, 98195, United States
Get access

Abstract

A capillary-enforced template-based method is described for the preparation of InVO4 nanotube arrays. Nanotube arrays of InVO4 were prepared by filling the InVO4 sol into pores of polycarbonate membranes and pyrolyzing through sintering. Another type of InVO4 nanotube arrays (InVO4/acac) are obtained from the sol with the addition of acetylene acetone (acac). For comparison purposes, InVO4 films were prepared by drop casting from InVO4 same sol. Films and the two types of nanotube arrays of InVO4 annealed at 500°C consist of mixed monoclinic (InVO4-I) and orthorhombic (InVO4-III) phases. Scanning electron microscopy (SEM) characterizations indicate that the nanotubes are well-aligned, perpendicular to substrate surface with the outer diameter of ~200 nm for short InVO4 nanotubes and ~170 nm for long InVO4 nanotubes. Chronopotentiometry results reveal that InVO4/acac nanotube array has the highest charge capacity (790 mAh/g), followed by InVO4 nanotube array (600 mAh/g) then InVO4 film (290 mAh/g). Such enhanced lithium-ion intercalation properties are ascribed to the large surface area and short diffusion distance offered by nanostructures and amorphisation caused by acetylene acetone in the case of InVO4/acac nanotube arrays.

Keywords

intercalationnanostructureenergy-storage
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 922: Symposium U – Organic and Inorganic Nanotubes – From Molecular to Submicron Structures , 2006 , 0922-U01-06
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Denis, S., Baudrin, E., Touboul, M., Tarascon, J.-M., J. Electrochem. Soc. 144, 4099 (1997).Google Scholar
2. Vuk, A. Šurca, Krašovec, U. Opara, Orel, B., Colomban, P., J. Electrochem. Soc. 148, H49 (2001).Google Scholar
3. Orel, B, Vuk, A. Šurca, Krašovec, U. Opara, Dražič, G., Electrochim. Acta 46, 2059 (2001).Google Scholar
4. Hirshes, M., Mater. Sci. Eng. B, 108, 1 (2004).Google Scholar
5. Zhang, L., Fu, H., Zhang, C., Zhu, Y., J. Solid State Chem. 179, 804 (2006).Google Scholar
6. Reed, J. S., Introduction to Principles of Ceramic Processing, (Wiley, New York, 1988).Google Scholar
7. Lakshmi, B. B., Dorhout, P. K., Martin, C. R., Chem. Mater. 9, 857 (1997).Google Scholar
8. Wang, Y. C., Leu, I. C., Hon, M. H., J. Mater. Chem. 12, 2439 (2002).Google Scholar
9. Limmer, S. J., Chou, T. P., Cao, G. Z., J. Sol-gel. Sci. Tech. 36, 183 (2005).Google Scholar
10. Maranchi, J. P., Velikokhatnyi, O. I., Datta, M. K., Kim, I., Kumta, P. N., Chapter 26 in Chemical Processing of Ceramics, eds., Lee, B. and Komarneni, S. (Marcel Dekker: New York, 2005) p.667.Google Scholar
11. Lee, K., Wang, Y., Cao, G. Z., J. Phys. Chem. B. 109, 16700 (2005).Google Scholar
12. Coustier, F., Passerini, S., Smyrl, W. H. Solid State Ionics 100, 247 (1997).Google Scholar