Article contents
Suitability of 4H-SiC Homoepitaxy for the Production and Development of Power Devices
Published online by Cambridge University Press: 01 February 2011
Abstract
In this paper, we present results of epitaxial layer deposition for production needs using our hot-wall CVD multi-wafer system VP2000HW from Epigress with a capability of processing 6×100mm wafers per run. Intra-wafer and wafer-to-wafer homogeneities of doping and thickness for full-loaded 6×100mm runs will be shown and compared to results of the former 7×3″ setup. The characteristic of the run-to-run reproducibility for the 6×100mm setup will be discussed. To demonstrate the suitability of the reactor for device production results on Schottky Barrier Diodes (SBD) processed in the multi-wafer system will be given. Furthermore, we show results for n- and p-type SiC homoepitaxial growth on 3″, 4° off-oriented substrates using a single-wafer hot-wall reactor VP508GFR from Epigress for the development of PiN-diodes with blocking voltages above 6.5 kV. Characteristics of n- and p-type epilayers and doping memory effects are discussed. 6.5 kV PiN-diodes were fabricated and electrically characterized. Results on reverse blocking behaviour, forward characteristics and drift stability will be presented.
Keywords
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 2008
References
REFERENCES
- 1
- Cited by