Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-24T16:03:24.617Z Has data issue: false hasContentIssue false
  • English
  • Français

Study on the Mechanical Properties and Creep Behaviour of Carbon Fiber Nano-Composites

Published online by Cambridge University Press:  24 May 2011

Yi-Luen LI ,
Wei-Jen Chen ,
Chin-Lung Chiang  and
Ming-Chuen Yip
Yi-Luen LI
Affiliation:
Department of Power Mechanical Engineering, National Tsing-Hua University, Hsin-Chu 30043, Taiwan, R.O.C.
Wei-Jen Chen
Affiliation:
Department of Power Mechanical Engineering, National Tsing-Hua University, Hsin-Chu 30043, Taiwan, R.O.C.
Chin-Lung Chiang
Affiliation:
Department of Safety, Health and Environmental Engineering, Hung-Kuang University, Taichung, 433, Taiwan, R.O.C.
Ming-Chuen Yip
Affiliation:
Department of Power Mechanical Engineering, National Tsing-Hua University, Hsin-Chu 30043, Taiwan, R.O.C.
Get access

Abstract

The surface modification of carbon nanotubes（CNTs）has been recently observed to influence the distribution of CNTs in epoxy resin and the mechanical properties and electrical conductivities of these CNTs. Accordingly, the treatment of CNTs with organic acids to oxidize them generates functional groups on the surface of CNTs. This investigation studies the consequent enhancement of the mechanical properties and electrical conductivities of CNTs. The influence of adding various proportions of CNTs to the epoxy resin on the mechanical properties and electrical conductivities of the composites thus formed is investigated, and the strength of the material is tested at different temperatures. Moreover, the creep behavior of carbon fiber （CF）/epoxy resin thermosetting composites was tested and analyzed at different temperatures and stresses. The creep exhibits only two stages- primary creep and steady-state creep. The effects of creep stress, creep time, and humidity on the creep of composites that contain various proportion of CNTs were investigated at various temperatures.

Creep strain is believed to increase with applied stress, creep time, humidity, and temperature. It also increases as hardness decrease. The test results also indicate that mechanical strength and electrical conductivity increase with the amount of CNTs added to the composites. Different coefficients of expansion of the matrix, fiber and CNTs, are such that overexpansion of the matrix at high temperature results in cracking in it. An SEM image of the fracture surface reveals debonding and the pulling out of longitudinal fibers because of poor interfacial bonding between fiber and matrix, which reduce overall strength.

Keywords

chemical compositionnanostructuremicrostructure
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1312: Symposium HH/II/JJ – Polymer-Based Materials and Composites—Synthesis, Assembly and Applications , 2011 , mrsf10-1312-ii05-03
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Cochet, M., Maser, W. K., Benito, A. M., Callejas, M. A., Martinez, M. T. and Benoit, J. M., “Synthesis of a new polyaniline/nanotube composite: “in-situ” polymerization and charge transfer through siteselective interaction,” Chem. Comm. 16 (2001) 1450–1451.Google Scholar
2. Hayhurst, D.R. J. Mech. Phys. Solids 1972;20:381.Google Scholar
3. Finnie, L., Heller, W.R. Creep of engineering materials. London: McGraw－Hill Book Company, 1959.Google Scholar
4. Bendersky, L., Rosen, A., Mukherjee, A.K. Int. Metal. Rev. 1985;130:1–15.Google Scholar
5. Mughrabi, H. Acta Metall. Mater. 1991;139:3067–3070.Google Scholar
6. Kumar, S., Doshi, H., Srinivasarao, M., Park, J. O. and Schiraldi, D. A., “Fibers from polypropylene/nano carbon fiber composites,” Polymer 43 (2002) 1701–1703.Google Scholar
7. Qian, D., Dickey, E. C., Andrews, R. and Rantell, T., “Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites,” Applied Physics Letters 76(20) (2000) 2868–2870.Google Scholar
8. Novak, I., Chodak, I., Investigation of the correlateion between electrical conductiveity and elongateion at break in polyurethane-based adhesives, Synthesis Metal, Vol. 131, (2002), pp.93–98.Google Scholar
9. Kortschot, M. T. and Woodhams, R. T., Computer Simulation of the Electrical Conductivity of Polymer composite Containing Matallic Fillers, Polymer Composite, Vol. 9, No.1, February, (1988), pp.60–71.Google Scholar
10. Zhang, S. Y. and Xiang, X. Y., “Creep Characterization of a Fiber Reinforced Plastic Material”, J. Reinforced Plastic and Composites, 11, 1187–1195, 1992.Google Scholar
11. Chen, C. H. and Chen, Y. C., “The Creep Behavior of Solid filled Rubber Composites”, J.Polymer Research, 1(1), 75–83, 1994.Google Scholar