Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-28T08:48:33.369Z Has data issue: false hasContentIssue false
  • English
  • Français

Sol-gel Synthesis and Characterization of YAG:Ce3+ Phosphors by Various Pre-firing Temperatures

Published online by Cambridge University Press:  01 February 2011

Kyu-Seog Hwang ,
Seung Hwangbo ,
Ju-Hyun Jeong ,
Young-Hwan Lee  and
Jin-Tae Kim
Kyu-Seog Hwang
Affiliation:
[email protected], Department of Biomedical Engineering, Nambu University, Gwangju, Korea, Republic of
Seung Hwangbo
Affiliation:
[email protected], Honam University, Photonic Engineering, Gwangju, Korea, Republic of
Ju-Hyun Jeong
Affiliation:
[email protected], Konyang University, Phhthalmic optics, Deajeon, Korea, Republic of
Young-Hwan Lee
Affiliation:
[email protected], Chunnam Techno College, Department of Automobile, Jellanam-do, Korea, Republic of
Jin-Tae Kim
Affiliation:
[email protected], Chonsun University, Department of Photonic Engineering, Gwangju, Korea, Republic of
Get access

Abstract

Ceria doped-yttrium aluminum garnet (Y3Al5O12:Ce3+, YAG:Ce), which is known as an efficient phosphor, have been widely used in optical display and lighting applications. Improved wet chemical method, sol-gel, has been studied, since conventional solid-state reaction requires a high-temperature and prolonged heating to obtain the pure phase. However, there has been little information, such as on pre-firing temperature, concerning high-quality powder formed by the wet chemical process. In this work, YAG:Ce was synthesized with a salted sol-gel process in which a water solution of inorganic salt with citric acid as additive. Transparent starting sol was pre-fired at 200 ˜ 300°C for 2 hrs in air and final annealing to obtain phase-pure YAG:Ce particles was performed at 1100°C for 2 hrs in argon. The effects of pre-firing temperatures on the crystal structure, morphology and luminescence were investigated. Effects of residual organics in the pre-fired gel on the properties of finally annealed phosphors will be fully discussed on the basis of the results of thermal analysis and chemical structure.

Keywords

sol-geloptical propertiespyrolysis
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1148: Symposium PP – Solid-State Chemistry of Inorganic Materials VII , 2008 , 1148-PP03-22
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jia, D., wang, Y., Guo, X., Li, K., Zou, Y. K., and Jia, W., J. Electrochem. Soc. 154, J1 (2007).Google Scholar
2. Kottaisamy, M., Thiyagarajan, P., Mishra, J., and Ramachandra Rao, M. S., Mater. Res. Bull. 43, 1657 (2008).Google Scholar
3. Matsubara, I., Parathaman, M., Allison, S. W., Cates, M. R., Beshears, D. L., and Holcomb, D. E., Mater. Res. Bull. 35, 217 (2000).Google Scholar
4. Li, J. G., Ikegami, T., Lee, J. H., Mori, T., and Yajima, Y., J. Eur. Ceram. Soc. 20, 2395 (2000).Google Scholar
5. Shea, L. E., McKittrick, J., and Lopez, O. A., J. Am. Ceram. Soc. 79, 3257 (1996).Google Scholar
6. Xia, G., Zhou, S., Zhang, J., and Xu, J., J. Cryst. Growth 279, 357 (2005).Google Scholar
7. Nassar, E. J., Pereira, P. F. D., Nassor, E. C. D., Avila, L. R., Ciuffi, K. J., and Calefi, P. S., J. Mater. Sci. 42, 2244 (2007).Google Scholar
8. Georgescu, S., Chinie, A. M., Stefan, A., and Toma, O., J. Optoelectron. & Adv. Mater. 7, 2985 (2005).Google Scholar
9. Zhang, J., Ning, J., Liu, X., Pan, Y., and Huang, L., J. Mater. Sci. Lett. 22, 13 (2003).Google Scholar
10. Chine, A. M., Stefan, A., and Georgescu, S., Romanian Reports on Phys. 57, 412 (2005).Google Scholar